Titanium alloys have been considered as unique materials for many years. Even their
microstructure and operational properties have been well known and described in details …

The paper presents the strength evaluation of the beam made of the sheets from the
aluminum alloy 6061-T6 and titanium alloy grade 5. The beam was made of two C-profiles …

Friction, wear, and lubrication are inherent to all metal-forming processes. Unfortunately,
they are particularly troublesome when forming titanium materials, which tend to form …

The paper presents the evaluation of the load capacity of lap joints and the distribution of
plastic deformations. The influence of the number and arrangement of welds on the load …

Single point incremental forming (SPIF) is becoming more and more widely used in the
metal industry due to its high production flexibility and the possibility of obtaining larger …

To improve the forming quality of V-shaped clamps, a basis for optimal V-shaped clamp
mold surface design is provided. In this paper, the V-shaped clamp stamping process is …

Titanium sheet metal components have wide applications in aerospace and nuclear
industries, and the weight of these components can be reduced by applications of tailor …

TA15 titanium alloy is welded by electron beam welding (EBW) and pulsed Nd: YAG laser
beam welding (P-LBW), respectively. Results show that the fusion zone (FZ) is mainly …

Titanium alloys have been considered as unique materials for many years. Even their
microstructure and operational properties have been well known and described in details …

The paper present the evaluate the bending load capacity of a composite beam made of
titanium Grade 2 and titanium alloy Grade 5. The beam was made using the Resistance …