An overview of Powder Metallurgy (PM) method for porous nickel titanium Shape Memory Alloy (SMA)
Z Abdullah, R Razali, I Subuki, MA Omar… - Advanced Materials …, 2016 - Trans Tech Publ
NiTi is categorized as a Shape Memory Alloy (SMA) that has been commercially studied and
used in biomedical industry due to two main unique properties, Pseudoelastic (PE) and …
used in biomedical industry due to two main unique properties, Pseudoelastic (PE) and …
Incorporation of HA into porous titanium to form Ti-HA biocomposite foams
Ti foams are advanced materials with great potential for biomedical applications as they can
promote bone ingrowth, cell migration and attachment through providing interconnected …
promote bone ingrowth, cell migration and attachment through providing interconnected …
Fabrication of porous β-Type Ti-40Nb alloys incorporated with TiH2 via powder metallurgy processing route under reducing environment
This work attempts to investigate the influence of TiH2 and processing route on
microstructure and mechanical properties of Ti-40Nb alloy. The difference in processing …
microstructure and mechanical properties of Ti-40Nb alloy. The difference in processing …
The Effect of Particles Shape and Size on Feedstock Flowibility and Chemical content of As-sintered NiTi Alloys
This paper presents a comparative study of two different titanium powders in fabrication of
NiTi alloys by metal injection moulding (MIM) route. Two batches of powder mixture …
NiTi alloys by metal injection moulding (MIM) route. Two batches of powder mixture …
Shape memory behaviour of NiTi alloy produced by MIM using palm stearin based binder
In this present work, NiTi alloy has been successfully produced by metal injection moulding
(MIM) starting with elemental powders mixture of Nickel (Ni) and Titanium (Ti) mixed with a …
(MIM) starting with elemental powders mixture of Nickel (Ni) and Titanium (Ti) mixed with a …
[PDF][PDF] Thermal and Flow Analysis of Stainless Steel and Alumina Feedstock Used for 2C-PIM Process.
Within this research, rheological analysis and thermal properties of two component
feedstock based on ceramic and metallic powders are carried out to understand their flow …
feedstock based on ceramic and metallic powders are carried out to understand their flow …
Tribology study of hydroxyapatite (HAp) scaffold blended single based binder via rheology and mechanical properties
MA Abu Bakar, SN Abd Aziz, MH Ismail - Industrial Lubrication and …, 2017 - emerald.com
Purpose This paper aims to investigate the vital characteristic of an innovative ceramic
injection molding (CIM) process for orthopedic application with controlled porosity and …
injection molding (CIM) process for orthopedic application with controlled porosity and …
[PDF][PDF] Copper/carbon nanotubes composites: Physical characterization
Carbon nanotubes (CNTs) reinforced with metal matrix composites (MMCs) have attracted
an increasing interest due to their promising properties. Powder metallurgy method was …
an increasing interest due to their promising properties. Powder metallurgy method was …
Viscosity analysis of copper powder mixed with palm stearin based binder
NA Nordin, I Rabzi, N Wahab, A Jumahat… - Applied Mechanics …, 2014 - Trans Tech Publ
In this experimental work, the viscosity of copper powder mixed with developed binder
system based on palm stearin were studied and analyzed by means of rheological test. The …
system based on palm stearin were studied and analyzed by means of rheological test. The …
The Effect of TiH2 Particle on Rheological Behaviour of NiTi for Metal Injection Moulding
This paper highlights the influence of titanium hydride particle on the rheological behaviour
of nickel-titanium feedstock used in the metal injection process. The ratio of 50at% nickel …
of nickel-titanium feedstock used in the metal injection process. The ratio of 50at% nickel …