Machine-learning and high-throughput studies for high-entropy materials
The combination of multiple-principal element materials, known as high-entropy materials
(HEMs), expands the multi-dimensional compositional space to gigantic stoichiometry. It is …
(HEMs), expands the multi-dimensional compositional space to gigantic stoichiometry. It is …
Corrosion-resistant high-entropy alloy coatings: a review
H Cheng, Z Pan, Y Fu, X Wang, Y Wei… - Journal of The …, 2021 - iopscience.iop.org
For a long time, the corrosion problem of materials has been an essential factor in restricting
high-tech and national economic development. As an effective means of corrosion …
high-tech and national economic development. As an effective means of corrosion …
Why CoCrFeMnNi HEA could not passivate in chloride solution?–A novel strategy to significantly improve corrosion resistance of CoCrFeMnNi HEA by N-alloying
H Feng, HB Li, J Dai, Y Han, JD Qu, ZH Jiang, Y Zhao… - Corrosion …, 2022 - Elsevier
This work elaborated the underlying mechanism for the non-passivation of CoCrFeMnNi
HEA in chloride solution based on the dissolution-diffusion-deposition model. A novel N …
HEA in chloride solution based on the dissolution-diffusion-deposition model. A novel N …
Corrosion behavior and mechanism of dual phase Fe1. 125Ni1. 06CrAl high entropy alloy
P Cui, Z Bao, Y Liu, F Zhou, Z Lai, Y Zhou, J Zhu - Corrosion Science, 2022 - Elsevier
This investigation explores the corrosion behavior and mechanism of as-cast dual phase Fe
1.125 Ni 1.06 CrAl high entropy alloy with low density (6.65 g/cm 3) and high hardness …
1.125 Ni 1.06 CrAl high entropy alloy with low density (6.65 g/cm 3) and high hardness …
High-temperature oxidation behavior and corrosion resistance of in-situ TiC and Mo reinforced AlCoCrFeNi-based high entropy alloy coatings by laser cladding
K Yu, W Zhao, Z Li, N Guo, G Xiao, H Zhang - Ceramics International, 2023 - Elsevier
In-situ TiC particles and Mo-enhanced AlCoCrFeNiMo x (TiC) 2-x high entropy alloy (HEA)
coatings (x= 0, 0.5, 1, 1.5, and 2) were prepared via laser cladding. The effects of changes in …
coatings (x= 0, 0.5, 1, 1.5, and 2) were prepared via laser cladding. The effects of changes in …
[HTML][HTML] Wear and corrosion properties of B4C-added CoCrNiMo high-entropy alloy coatings with in-situ coherent ceramic
D Jiang, H Cui, H Chen, X Zhao, G Ma, X Song - Materials & Design, 2021 - Elsevier
In this study, a coherent ceramic strengthening wear-corrosion resistant CoCrNiMo high
entropy alloy coating was successfully fabricated on 304 stainless steel (304ss) by laser …
entropy alloy coating was successfully fabricated on 304 stainless steel (304ss) by laser …
Tailoring microstructure and corrosion behavior of CoNiVAlx medium entropy alloys via Al addition
The effect of Al addition on the microstructure and corrosion behavior of CoNiVAl x medium
entropy alloys (MEAs) was investigated. Results indicated that the enhanced corrosion …
entropy alloys (MEAs) was investigated. Results indicated that the enhanced corrosion …
Effect of crystal structure and grain size on corrosion properties of AlCoCrFeNi high entropy alloy
High entropy alloys (HEAs) have drawn considerable attention owing to their unique
properties such as high fracture toughness, good strength–ductility combination and …
properties such as high fracture toughness, good strength–ductility combination and …
Machine-learning-guided descriptor selection for predicting corrosion resistance in multi-principal element alloys
More than $270 billion is spent on combatting corrosion annually in the USA alone. As such,
we present a machine-learning (ML) approach to down select corrosion-resistant alloys. Our …
we present a machine-learning (ML) approach to down select corrosion-resistant alloys. Our …
Effect of Cu content on the microstructure and corrosion resistance of AlCrFeNi3Cux high entropy alloys
J Wang, H Jiang, X Chang, L Zhang, H Wang, L Zhu… - Corrosion …, 2023 - Elsevier
Abstract The FCC+ B2/BCC structure of AlCrFeNi 3 Cu x (x= 0 eutectic, x= 0.2, 0.4 hypo-
eutectic, x= 0.6, 0.8, 1.0 dendritic) high-entropy alloys were fabricated and corrosion …
eutectic, x= 0.6, 0.8, 1.0 dendritic) high-entropy alloys were fabricated and corrosion …