The rise in oil prices and the increased concern about environmental protection from CO2
emissions have promoted the attention to the use of nuclear power as a viable energy …

The amorphous AlCrFeMoTi high entropy alloy (HEA) coating with near-equal molar ratio
was successfully deposited on F/M substrate by magnetron sputtering method. The coating …

LBE is one of the primary coolant candidates of advanced nuclear reactors. The present
review conducts an assessment of the coolant based on a series of liquid metal coolant …

Concentrated solar power, and in particular central receiver systems, can play a major role
as a renewable energy source with the inherent possibility of including a thermal energy …

Sixteen kinds of FeCrAl coatings with different Cr and Al contents were prepared by the
magnetron sputtering method, and the thermal shock resistance and static lead‑bismuth …

The amorphous Al 2 O 3 coating with a thickness of approximately 3.3 μm was prepared on
ferritic/martensitic steel to investigate the corrosion resistance in contact with static liquid …

To study the application prospect of binary Pb-Bi eutectic (LBE) alloy electrode in
pyroprocessing, the reduction mechanisms of Sm (III) and Dy (III) on W, liquid Bi, liquid Pb …

As one of the shielding materials, lead (Pb) and its alloy exhibit excellent ray absorption and
radiation shielding ability due to its high density and atomic mass. In this work, the explosive …

The degradation of structural materials caused by the corrosion of liquid lead‐bismuth
eutectic (LBE), the coolant of lead‐cooled fast reactors (LFRs), has become one of the …

Abstract China Low Activation Martensitic (CLAM) steel was one of the Reduced-Activation
Ferritic/Martensitic (RAFM) steels which were widely considered as the candidate structural …