Effect of sintering pressure and temperature on structure and properties of NiAl metal-intermetallic composites produced by SPS

TS Ogneva, IA Bataev, VI Mali, AG Anisimov… - Materials …, 2021 - Elsevier
In recent decades, spark plasma sintering (SPS) has become a widespread technique in the
production of high-quality intermetallic-based materials. In this study, we used SPS to …

Effect of deposition substrates on surface topography, interface roughness and phase transformation of the Al/Ni multilayers

B Liu, X Yu, X Jiang, Y Qiao, L You, Y Wang… - Applied Surface Science, 2021 - Elsevier
Abstract The Al/Ni multilayers with modulation periods of 50, 250, and 500 nm were
deposited on AlN, AlNi 3, Si, and Al 2 O 3, respectively. Surface topography, interface …

Rapid fabrication and characterization of superhydrophobic tri-dimensional Ni/Al coatings

X Guo, X Li, Z Wei, X Li, L Niu - Applied Surface Science, 2016 - Elsevier
Abstract Superhydrophobic tri-dimensional Ni/Al coatings (3DNACs) with great application
value have been successfully fabricated via a simple two-step method combined with …

Microstructure and reactivity of cryomilled Al-Ni energetic material with nanoscale lamellar structure

A Sharma, H Lee, B Ahn - Journal of Materials Science, 2022 - Springer
Abstract An Al-Ni alloy system with excellent energy density and mechanical performance is
regarded as a novel high-energy–density material to enhance the energy emission of …

[HTML][HTML] High-throughput investigation of structural evolution upon solid-state in Cu–Cr–Co combinatorial multilayer thin-film

J Hui, Q Hu, H Zhang, J Zhao, Y Luo, Y Ren, Z Zhang… - Materials & Design, 2022 - Elsevier
Abstract Cu–Cr–Co combinatorial multilayer thin-films were prepared by a high-throughput
ion beam sputtering system. Based on the thickness ratio among the individual nanoscale …

Characterization of Al/Ni multilayers and their application in diffusion bonding of TiAl to TiC cermet

J Cao, XG Song, LZ Wu, JL Qi, JC Feng - Thin Solid Films, 2012 - Elsevier
The Al/Ni multilayers were characterized and diffusion bonding of TiAl intermetallics to TiC
cermets was carried out using the multilayers. The microstructure of Al/Ni multilayers and …

Joining of TiAl to steel by diffusion bonding with Ni/Ti reactive multilayers

S Simões, AS Ramos, F Viana, MT Vieira, MF Vieira - Metals, 2016 - mdpi.com
Dissimilar diffusion bonds of TiAl alloy to AISI 310 stainless steel using Ni/Ti reactive
multilayers were studied in this investigation. The Ni and Ti alternating layers were …

Asymmetric atomic diffusion and phase growth at the Al/Ni and Ni/Al interfaces in the Al-Ni multilayers obtained by magnetron deposition

Y Wang, Z Xing, Y Qiao, H Jiang, X Yu, F Ye… - Journal of Alloys and …, 2019 - Elsevier
The interface morphology and interdiffusion of the Al-Ni multilayers were studied by
transmission electron microscopy (TEM) and atom probe tomography (APT). Asymmetric …

Structure and oxidation behavior of NiAl-based coatings produced by non-vacuum electron beam cladding on low-carbon steel

TS Ogneva, AA Ruktuev, DV Lazurenko, KI Emurlaev… - Metals, 2022 - mdpi.com
NiAl-based intermetallic coatings were obtained using non-vacuum electron beam cladding
on low-carbon steel. The structure of the coatings was investigated using optical microscopy …

A comprehensive investigation on the electrophoretic deposition (EPD) of nano-Al/Ni energetic composite coatings for the combustion application

X Guo, X Li, H Li, D Zhang, C Lai, W Li - Surface and Coatings Technology, 2015 - Elsevier
In this study, the nano-Al/Ni energetic composite coatings (ANECCs) have been successfully
fabricated by the electrophoretic deposition (EPD) method at the room temperature and …