Wear and corrosion studies of duplex surface-treated AISI-304 steel by a combination of cathodic cage plasma nitriding and PVD-TiN coating
This work aims to improve the surface properties of AISI-304 austenite stainless steel by
using duplex treatment of cathodic cage plasma nitriding (CCPN) and PVD-TiN, and the …
using duplex treatment of cathodic cage plasma nitriding (CCPN) and PVD-TiN, and the …
Effect of substrate surface roughness on adhesion of titanium nitride coatings deposited by physical vapour deposition technique
T Bhushan, A Chandrashekhar… - IOP conference series …, 2020 - iopscience.iop.org
Medium carbon steel (EN8) substrates with different Surface Roughness (SR) were
deposited by Titanium Nitride (TiN). The research work was carried out to investigate the …
deposited by Titanium Nitride (TiN). The research work was carried out to investigate the …
Impact of structural and optical properties tunability of SnSe2 thin films on its optoelectronic properties
AM El-Mahalawy, SA Mansour, AR Wassel… - Surfaces and …, 2022 - Elsevier
As a result of the precise controllability of the properties of tin diselenide and the possibility
of harmonious integration with silicon technology in many applications. Attention was …
of harmonious integration with silicon technology in many applications. Attention was …
Wide-temperature-range tribological properties of Cu-Ni-Al films with multiple oxidation states
Z Cheng, X Wang, X Li, Z Li, Y Hu, Q Jiang, R Liu… - Vacuum, 2025 - Elsevier
High-temperature (HT) apparatus suffer from galling and seizure of contact interface, for
which a wear-resistant film is helpful but challenging to design. In this work, the Cu-Ni-Al …
which a wear-resistant film is helpful but challenging to design. In this work, the Cu-Ni-Al …
Corrosion behavior of niobium-coated 316L stainless steels as metal bipolar plates for polymer electrolyte membrane fuel cells
YS Kim, IS Lee, JY Choi, S Jun, D Kim, BC Cha… - Materials, 2021 - mdpi.com
Niobium was coated on 316L stainless steel by pulsed direct-current (DC) magnetron
sputtering to improve corrosion behavior. The applied bias voltage highly affected the …
sputtering to improve corrosion behavior. The applied bias voltage highly affected the …
Cathodic cage plasma pre-treatment of TiN-coated AISI-304 stainless steel for enhancement of mechanical strength and wear resistance
Although austenitic stainless steels (ASSs) are known for their superior corrosion resistance
properties, the use of such materials in motion contact parts is limited due to their low wear …
properties, the use of such materials in motion contact parts is limited due to their low wear …
Enhanced surface properties of M2 steel by plasma nitriding pre-treatment and magnetron sputtered TiN coating
MS Libório, EO Almeida, SM Alves… - … Journal of Surface …, 2020 - inderscienceonline.com
AISI M2 high-speed steels are widely used in cutting/forming tools due to their easy
machinability and balanced toughness. Unfortunately, they exhibit severe cutting edge wear …
machinability and balanced toughness. Unfortunately, they exhibit severe cutting edge wear …
Optimization of growth conditions for direct synthesis of SnSe2 thin films via improved atmospheric pressure chemical vapor deposition
B Wu, Z Wang, Z Wang, J Yu, H Zhao - Optical Materials, 2025 - Elsevier
In this study, high-quality tin diselenide (SnSe 2) thin films were successfully synthesized
using an optimized atmospheric pressure chemical vapor deposition (APCVD) technique …
using an optimized atmospheric pressure chemical vapor deposition (APCVD) technique …
The impact of BBr3/TiCl4 ratios on the microstructural and mechanical characteristics of TiBN coatings deposited using a pulsed-PACVD technique
This study aimed to investigate the impact of precursor ratios on both the microstructural and
tribological characteristics of TiBN coatings. Using the PACVD process, TiN, TiB 2, and three …
tribological characteristics of TiBN coatings. Using the PACVD process, TiN, TiB 2, and three …
Structural characterization of TiN coatings on Si substrates irradiated with Ar ions
M Popović, M Novaković, N Bibić - Materials characterization, 2009 - Elsevier
The present study deals with TiN/Si bilayers irradiated at room temperature (RT) with 120
keV Ar ions. The TiN layers were deposited by dc reactive sputtering on Si (100) wafers to a …
keV Ar ions. The TiN layers were deposited by dc reactive sputtering on Si (100) wafers to a …