[HTML][HTML] Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions

T Sakai, A Belyakov, R Kaibyshev, H Miura… - Progress in materials …, 2014 - Elsevier
The evolution of the new microstructures produced by two types of dynamic recrystallization
is reviewed, including those brought about by severe plastic deformation (SPD). The …

[HTML][HTML] Alloy design strategies to increase strength and its trade-offs together

SZ Han, EA Choi, SH Lim, S Kim, J Lee - Progress in Materials Science, 2021 - Elsevier
It is an ultimate goal for almost all the metallurgists to improve strength, ductility, formability
and conductivity of metal together. However, ductility, formability and conductivity are …

Perspectives on titanium science and technology

D Banerjee, JC Williams - Acta Materialia, 2013 - Elsevier
The basic framework and-conceptual understanding of the metallurgy of Ti alloys is strong
and this has enabled the use of titanium and its alloys in safety-critical structures such as …

Deformation behavior and microstructure evolution of titanium alloys with lamellar microstructure in hot working process: A review

P Gao, M Fu, M Zhan, Z Lei, Y Li - Journal of Materials Science & …, 2020 - Elsevier
Titanium alloys have been widely used in many industrial clusters such as automotive,
aerospace and biomedical industries due to their excellent comprehensive properties. In …

Mechanisms of macrozone elimination and grain refinement of near α Ti alloy via the spheroidization of the Widmannstätten structure

S Xu, H Zhang, N Xiao, R Qiu, Z Cui, M Fu - Acta Materialia, 2023 - Elsevier
Regions with sharp local textures, ie, macrozones, are common microstructural
inhomogeneities in titanium (Ti) alloys that significantly reduce the fatigue resistance of Ti …

An overview of the thermomechanical processing of α/β titanium alloys: current status and future research opportunities

SL Semiatin - Metallurgical and Materials Transactions A, 2020 - Springer
Current understanding of the principles underlying the thermomechanical processing (TMP)
of α/β titanium alloys is reviewed. Attention is focused on the formulation of constitutive …

Spheroidization of the lamellar microstructure in Ti–6Al–4V alloy during warm deformation and annealing

S Zherebtsov, M Murzinova, G Salishchev, SL Semiatin - Acta Materialia, 2011 - Elsevier
The spheroidization behavior of an α colony microstructure in Ti–6Al–4V alloy during warm
working and subsequent annealing at 600 and 800° C was established. The principal …

Strength/ductility trade-off of Laser Powder Bed Fusion Ti-6Al-4V: Synergetic effect of alpha-case formation and microstructure evolution upon heat treatments

Q Gaillard, X Boulnat, S Cazottes, S Dancette… - Additive …, 2023 - Elsevier
Post-processing heat treatments (HT) are performed on Ti-6Al-4V components fabricated by
Laser Powder Bed Fusion (L-PBF) to release the residual stresses and transform the non …

The influence of temperature and strain rate on the deformation response and microstructural evolution during hot compression of a titanium alloy Ti–6Al–4V–0.1 B

S Roy, S Suwas - Journal of Alloys and Compounds, 2013 - Elsevier
Hot deformation behavior of a hypoeutectic Ti–6Al–4V–0.1 B alloy in (α+ β) phase field is
investigated in the present study with special reference to flow response, kinetics and …

Deformation mechanism of bimodal microstructure in Ti-6Al-4V alloy: The effects of intercritical annealing temperature and constituent hardness

Y Chong, T Bhattacharjee, Y Tian, A Shibata… - Journal of Materials …, 2021 - Elsevier
The so-called bimodal microstructure of Ti-6Al-4V alloy, composed of primary α grains (α p)
and transformed β areas (β trans), can be regarded as a “dual-phase” structure to some …