Metal matrix nanocomposites (MMNCs) are those metal matrix composites where the
reinforcement is of nanometer dimensions, typically less than 100 nm in size. Also, it is …

The additive manufacturing of bulk-form TiC/Ti nanocomposite parts was performed using
Selective Laser Melting (SLM). Two categories of nanopowder, ie, ball-milled TiC/Ti …

The pioneering work related to the spark plasma sintering (SPS) technique, also known as
pulsed electric current sintering (PECS), started in around 1906 when the first direct current …

Al 2 O 3\Ti composites presenting a range of metal to ceramic ratios were fabricated using
SPS technology and subsequently characterized. A titanium hydride that decomposes in the …

The fracture toughness and wear behavior as well as the microstructural evolutions of the
NiAl intermetallic and NiAl–15 wt%(Al 2 O 3–13% TiO 2) reinforced nanocomposite HVOF …

We report the mechanical characterization by multiscale indentation of particle reinforced
dense Ni/Al 2 O 3 metal matrix nanocomposites (MMNC) obtained by high-kinetic …

Abstract Al-4.4 Cu/TiB 2 composites were fabricated with and without post-in-situ reaction
ultrasonic melt treatment. The structural and mechanical behaviors of the composites in both …

A 50: 50 atomic ratio of elemental Ni and Al powders were subjected to mechanical alloying
(MA) in a toluene medium and were consolidated via spark plasma sintering (SPS). The …

The synthesis and microstructural evolutions of the NiAl-15 wt%(Al 2 O 3–13% TiO 2)
nanocomposite powders were studied. These nanocomposite powders are used as …

Abstract The B2-Aluminide matrix (FeAl and NiAl) with in-situ Al 2 O 3 reinforcement were
synthesized using reactive milling. The oxides (Fe 2 O 3 and NiO) were reduced by Al during …