In coal fired power plants, the metallic surfaces such as boiler tubes, walls of combustion
chambers and other parts degrade by corrosion, erosion and abrasion. It happens due to the …

Thermal spray techniques have been extensively used to deposit coatings of varying
compositions on a variety of industrial components for life enhancement under wear and …

Abstract Ceramic composite Cr 3 C 2–25% NiCr with high corrosion resistivity (up to 900° C)
is applied on carbon steel (SC45) pipes by two different thermal spray-coating techniques …

With the aim of further improving the high-temperature tribological properties and extending
the application of typical chromium carbide cermet coating, a novel Cr 3 C 2 …

Sažetak In the present work, 5 and 10 wt.% yttria-stabilized zirconia (YSZ) nanoparticles
were reinforced in Ni-20Cr powder and deposited on boiler tube steel using a high-velocity …

This study presents hot corrosion behavior of the superalloy IN718 in 100 wt.% NaCl (salt S)
and in salt mixtures of 60 wt.% Na 2 SO 4+ 40 wt.% V 2 O 5 (SM1) and 75 wt.% Na 2 SO 4+ …

The present work investigates the hot-corrosion behavior of carbon nanotube (CNT)-
reinforced chromium oxide coatings on boiler steel in a molten salt (Na 2 SO 4-60wt% V 2 O …

The high-temperature oxidation resistance of chromium carbide cermet coating was
improved by developing a novel Cr 3 C 2-NiCrCoMo/nano-CeO 2 (NCE) composite coating …

Corrosion behaviour of hot-dip aluminized-coated and uncoated Alloy 718 was examined in
dry air and with NaCl salt. Tests were done at 750° C for 10 h and cooled to room …

The hot-corrosion behavior of detonation-gun sprayed Cr 3 C 2-NiCr coatings with and
without 0.4 wt.% CeO 2 additive on Ni-based superalloy inconel-718 is comparatively …