This paper presents a review of gas-phase detailed kinetic models developed to simulate
the low-temperature oxidation and autoignition of gasoline and diesel fuel components …

Bioethanol–gasoline blends represent an emerging direction in the attempts to reduce GHG
emissions, urban and road-side pollution and to limit the use of fossil fuels in vehicle …

This paper reports the Research (RON) and Motor (MON) Octane Numbers of ethanol
blended with production gasoline, four gasoline surrogates, n-heptane, isooctane and …

Ionic Liquids ILs provide an important alternative in removing aromatic sulphur compounds
by Liquid–Liquid Extraction (LLE). A total of 28 anions and 6 cations resulting in 168 …

Distillation curves are presented for single-alcohol blends in gasoline, containing 5− 85% by
volume of methanol, ethanol, 1-propanol, 2-propanol, 1-butanol, 2-butanol, i-butanol (2 …

Five-and six-membered heteroaromatic nitrogen compounds play an inhibiting role in the
hydrodesulfurization of diesel oil. In this work, the ionic liquids (ILs) are used as green …

This paper is a review of the available literature on the main features of 11 of the most widely
adopted oxygenated additives to base gasoline and diesel, focusing particularly on the …

Waste from the food is a challenge to the environment all over the globe, hence there is
need to be recycled. Vegetables and fruits biomass is a resource of renewable energy with …

The performance of two new oxygenated additives, ethyl acetate and methyl acetate was
evaluated on the Reid Vapor Pressure (RVP), distillation curves, Drivability Index (DI) …

The oxygenates ethanol (EtOH), ethyl-tert-butyl ether (ETBE), and dimethyl carbonate (DMC)
were blended in a gasoline blendstock at levels of 2.8 wt% oxygen. Chemical and physical …