This paper presents the results of integrating microseismic fracture mapping with numerical
production modeling of fracture networks in the Barnett shale. Microseismic fracture …

Interfacial tension (IFT) as one of the main properties for efficient CO2 flooding planning in
oil reservoirs depends strongly on pressure, temperature, and composition of the reservoir …

Multiple contact miscible floods such as injection of relatively inexpensive gases into oil
reservoirs are considered as well-established enhanced oil recovery (EOR) techniques for …

Gas injection process is one of the most dependable techniques in enhanced oil recovery
(EOR) methods. Multiple contact miscible injection is the method that has been well …

The carbon dioxide (CO2) based enhanced oil recovery methods (EORs) are considered
among the promising techniques for increasing the recovery factor from mature oil reservoirs …

CO2 injection processes are among the effective methods for enhanced oil recovery. A key
parameter in the design of CO2 injection project is the minimum miscibility pressure (MMP) …

Accurate knowledge of the minimum miscibility pressure (MMP) is essential in successful
design of any miscible gas injection process, particularly in CO 2 flooding. It is however well …

Determining gas and oil minimum miscibility pressure (MMP) plays a vital role in the
enhanced oil recovery. Injecting gases above the MMP into oil reservoirs leads to a …

A simplification for the Nasrifar–Moshfeghian (NM) liquid density correlation has been
developed. A replacement for the Mathias and Copeman temperature-dependent term with …

In this contribution, 10 equations of state (EoSs) are used to predict the thermo-physical
properties of natural gas mixtures. One of the EoSs is proposed in this work. This EoS is …