Strength properties of annealed austenitic stainless steels are relatively low and therefore
improvements are desired for constructional applications. The reversion of deformation …

Maraging structural materials have been traditionally indicated as essential metallic alloys
for hundreds of years. The highest strength of the aged martensite alloys requires the …

Strain partitioning and localization were investigated in a high-Mn steel (17.1 wt.% Mn)
during tensile testing by a correlative probing approach including in-situ synchrotron X-ray …

This paper investigates the surface enhancement treatment of 12Cr17Mn6Ni5N steel weld
joints using the Strengthened Grinding Process (SGP) and explores its effect on their surface …

Abstract Austenite reversion, ie, a'-martensite→ γ phase transformation in UNS S32304 lean
duplex steel was investigated. The material was cold rolled to a true strain (ε) of 1.61 and …

An anomalous increase in magnetization was investigated in a cold-rolled high-Mn TRIP
steel (16.8 wt% Mn) annealed at 350° C for times varying from 5 to 120 min, before the start …

In this study, a nanocrystalline layer composed primarily of martensite phase was prepared
on the surface of 304 stainless steel. Furthermore, the martensite phase content in the …

The stacking fault energy (SFE) of face-centered cubic (FCC) alloys is a critical parameter
that controls microstructural and crystallographic texture evolution during deformation and …

RESUMO A transformação induzida por deformação da austenita (γ) em martensita εHCP e
α'(TRIP–Transfomation-induced Plasticity) aumenta a capacidade de deformação plástica e …

The rapid advancement of cryogenic technology is now boosting the demand for strong and
ductile structural materials for low-temperature applications ranging from familiar natural gas …