The development of modern science and technology requires high magnetic fields
exceeding 25T. Second-generation high-temperature superconducting wires, ie REBCO …

We review the scaling relations for the critical current density (J c) in Nb 3 Sn wires and
include recent findings on the variation of the upper critical field (H c2) with temperature (T) …

For high current superconductors in high magnet fields with currents in the order of 50 kA,
single ReBCO coated conductors must be assembled in a cable. The geometry of such a …

Performance Boundaries in Nb3Sn Superconductors Page 1 Performance Boundaries in Nb 3
Sn Superconductors Arno Godeke Berkeley, CA May 1, 2006 Page 2 A. Godeke – May 1, 2006 …

Transverse load optimization in Nb3Sn CICC design; influence of cabling, void fraction and
strand stiffness - IOPscience This site uses cookies. By continuing to use this site you agree to …

The differences in thermal contraction of the composite materials in a cable in conduit
conductor (CICC) for the International Thermonuclear Experimental Reactor (ITER), in …

The slit technique is an essential process for narrowing the second-generation high-
temperature superconducting (2G-HTS) tapes. It is still very challenging to eliminate edge …

The ITER magnets experiencing high magnetic field (> 11T), the central solenoid (CS) and
the toroidal field (TF) system, will make use of complex conductors using Nb3Sn as …

For high-current REBCO superconductors in high magnet fields with currents on the order of
50 kA, single coated conductors must be assembled in a cable. Under operating conditions …

Powder-in-tube (PIT) processed niobium–tin wires are commercially manufactured for nearly
three decades and have demonstrated a combination of very high current density (presently …