We report on phase transitions between isotropic and nematic liquid crystal phases in
nonequilibrium systems (NESs). ac field-driven electroconvection (EC) provides an NES …

The article deals with phase transformations and austenitizing behavior of the 1.2343 tool
steel. Dilatation analyses of a series of samples were performed at various cooling rates …

Impurity elements have been added to a commercial low carbon steel grade to simulate the
levels that could arise as a result of increased scrap recycling during steel production. In this …

Scheil's additivity rule is widely applied to converting isothermal phase transformation
kinetics to anisothermal ones. However, it often causes serious discrepancies between the …

In this paper, a simultaneous thermal analyzer carried out isothermal eutectoid
transformation experiments of Fe–0.4 Mn, Fe–1.2 Mn, and Fe–1.2 Mn–0.2 Si alloys. The …

42CrMo4-type steel grades are widely used in a great variety of components that require ad
hoc mechanical properties. However, due to the dimensions of large components and the …

Solute atom (s) residence mechanism causes instability in body-centred cubic (bcc)
refractory metals. Earlier studies have considered the mechanism of oxygen (O) or carbon …

利用DIL805A 淬火变形膨胀仪对新型Cr3 型热作模具钢4Cr3Mo2V 进行过冷奥氏体连续冷却
转变和过冷奥氏体等温转变试验, 研究了冷却速度对相变组织和硬度的影响, 绘制了Cr3 …

Continuous cooling transformation (CCT) diagrams can be constructed by empirical
methods, which is expensive and time consuming, or by fitting a model to available …

Numerical modelling tools provide valuable means to quantitatively control
thermomechanical processing. Several modelling tools have been applied and developed …