The conventional forming limit diagram (FLD) is described as a plot of major strain versus
minor strain. However, FLD is dependent on forming history and strain path. In the present …

Abstract Single Point Incremental Forming (SPIF) of sheet metals is an area where industry
can focus in the future due to the enormous opportunities available for automated fabrication …

The objective of the present research work is to study the fracture behaviour (void
coalescence) of titanium grade 2 sheets using the Single Point Incremental Forming (SPIF) …

Abstract Experimental Forming Limit Curve (FLC) and tensile properties of various steel
grades are collected from literatures to validate the proposed model. The experimental …

The major problem in determining the forming limit diagram (FLD) with the Marciniak–
Kuczynski (M–K) model is the necessity of an experimental point in order to find the initial …

The effects of cold rolling reduction rates and recrystallization annealing temperature on the
microstructure, texture, and anisotropic properties of high-strength low-alloy (HSLA) steel …

Investigation of the mechanical properties and forming limit diagrams (FLDs) of Fe-0.20 C-
1.49 Mn-1.52 Si-0.58 Cr-0.05 Nb (wt%) steel treated by conventional quenching and …

The single point incremental forming (SPIF) process is gaining importance in academic,
research and industrial sectors due to its inherent advantages over conventional sheet metal …

One of the major manufacturing processes to produce components from flat sheets is
forming. The automotive industry is one of the highest markets for stamped parts and is, thus …

Requirement of forming limit curve appears indispensible for property check during formable
sheet metal development cycle and quality control of formable sheet metal at production …