[HTML][HTML] ZnO size and shape effect on antibacterial activity and cytotoxicity profile
N Babayevska, Ł Przysiecka, I Iatsunskyi… - Scientific Reports, 2022 - nature.com
The aim of our work was the synthesis of ZnO nano-and microparticles and to study the
effect of shapes and sizes on cytotoxicity towards normal and cancer cells and antibacterial …
effect of shapes and sizes on cytotoxicity towards normal and cancer cells and antibacterial …
[HTML][HTML] Cotton fabric loaded with ZnO nanoflowers as a photocatalytic reactor with promising antibacterial activity against pathogenic E. coli
Nanofinishing is the process by which ultrafine dispersion of nanomaterials is applied to a
textile for the development of functionalities. The utilization of nanometal oxides as …
textile for the development of functionalities. The utilization of nanometal oxides as …
Preparation of site-specific Z-scheme g-C3N4/PAN/PANI@ LaFeO3 cable nanofiber membranes by coaxial electrospinning: Enhancing filtration and photocatalysis …
Y Mao, L Lin, Y Chen, M Yang, L Zhang, X Dai, Q He… - Chemosphere, 2023 - Elsevier
The coaxial electrospinning method for preparation of gC 3 N 4/polyacrylonitrile
(PAN)/polyaniline (PANI)@ LaFeO 3 cable fiber membrane (PC@ PL) was designed for …
(PAN)/polyaniline (PANI)@ LaFeO 3 cable fiber membrane (PC@ PL) was designed for …
[HTML][HTML] Fabrication of LaFeO 3 and rGO-LaFeO 3 microspheres based gas sensors for detection of NO 2 and CO
In the present report, gas sensing devices based on LaFeO3 and rGO-LaFeO3 were
fabricated by a photolithography technique. The X-ray diffraction, Raman spectra and FT-IR …
fabricated by a photolithography technique. The X-ray diffraction, Raman spectra and FT-IR …
Metal-organic framework-derived LaFeO3@ C: An adsorbent for removing organic dyes from water
Abstract Metal-Organic Frameworks (MOFs) and MOF-derived materials are emerging as a
potential candidate in the field of adsorption owing to their vital properties of high surface …
potential candidate in the field of adsorption owing to their vital properties of high surface …
Formation and textural characterization of size-controlled LaFeO3 perovskite nanoparticles for efficient photocatalytic degradation of organic pollutants
KMS Khalil, AH Mahmoud, M Khairy - Advanced Powder Technology, 2022 - Elsevier
A series of LaFeO 3 perovskite nanoparticles (NPs) were successfully formed by a direct sol-
gel method involving different citric acid to metal ratios of x (where x= 2–16). The resulted …
gel method involving different citric acid to metal ratios of x (where x= 2–16). The resulted …
Floatable photocatalyst LaFeO3/modified expanded perlite composite for photocatalytic ammonia degradation
LY Khen, SS Mohtar, F Aziz, WNW Salleh… - Journal of Water …, 2021 - Elsevier
In this research, visible-light active perovskite photocatalyst, lanthanum orthoferrite (LFO),
and floating photocatalyst composites, namely LFO/expanded perlite (EP) and LFO/modified …
and floating photocatalyst composites, namely LFO/expanded perlite (EP) and LFO/modified …
Sol–gel synthesis and investigation of catalysts on the basis of perovskite-type oxides GdMO3 (M = Fe, Co)
LV Yafarova, IV Chislova, IA Zvereva… - Journal of Sol-Gel …, 2019 - Springer
The perovskite-type oxides GdCo x Fe 1− x O 3 (x= 0; 0.2; 0.5; 0.8; 1) synthesized by the sol–
gel method were tested as catalysts in the dry reforming of methane to syngas between 500 …
gel method were tested as catalysts in the dry reforming of methane to syngas between 500 …
Optical and photoluminescence response driven by sintering temperature in LaFeO3 nano-perovskites
In this report, we synthesized LaFeO3 nano-perovskite compounds using conventional sol–
gel techniques at three different sintering temperatures of 550, 650, and 750° C. This study …
gel techniques at three different sintering temperatures of 550, 650, and 750° C. This study …
[HTML][HTML] The Effect of Strontium Doping on LaFeO3 Thin Films Deposited by the PLD Method
A Cyza, Ł Cieniek, T Moskalewicz, W Maziarz… - Catalysts, 2020 - mdpi.com
The aim of the presented investigations was to deposit the thin films La1− xSrxFeO3 (x= 0,
0.1, 0.2) on (100) Si substrate by using the Pulsed Laser Deposition (PLD) method. Structure …
0.1, 0.2) on (100) Si substrate by using the Pulsed Laser Deposition (PLD) method. Structure …