Gusset joints are widely used in aluminium alloy single-layer latticed shells. Gusset joints
connect only the upper and lower cover plates to the flange of the aluminium alloy beam …

In the study, experimental and theoretical studies were carried out to assess the influence of
the shapes of dents in the tank wall on the stress-strain state of the defect zone. By testing …

In the study, experimental and theoretical studies were carried out to assess the influence of
the vertical mounting joint zone of the tank on the stress-strain state of the defect zone. Thus …

A structure of circular tubes subjected to radial extrusion with variable geometrical
configurations was analysed. In a quasi-static experiment, axial grooves were produced on …

ESTIMATION OF THE STRENGTH OF VERTICAL CYLINDRICAL LIQUID STORAGE TANKS
WITH DENTS IN THE WALL Page 1 Eastern-European Journal of Enterprise Technologies …

An experimental study was conducted to investigate the buckling behaviour of cylindrical
shells with a stepwise wall thickness when subjected to a combination of axial compression …

Production, transportation, and refining of oil are currently one of the main areas
characterizing the level of competitiveness of the state economy and the degree of industrial …

This paper reports an analysis of the frequencies and shapes of oscillations of the tank with
a volume of 3000 m³ with a winding of highstrength steel wire with a diameter of 3 mm, 4 …

Cylindrical shell structures are ubiquitous and essential supporting structures in various
engineering applications. The aim of this research work is to provide a comprehensive …

In this paper, strength and buckling behavior analysis of a ring-stiffened cylindrical shell for
the sightseeing submersible subjected to mechanical and thermal loads are studied. Based …