The microstructure and corrosion behavior of Al-0.5 Mg-0.08 Sn-0.08 Ga (wt%) anode
material solutionized at different temperatures ranging from 400 to 550° C is studied …

In the present study, we report a cost-effective method of flux-shielded air induction melting
using commercial grade master alloys to produce nanocrystalline soft magnetic Fe 73.5 Si …

The effect of milling time on the magnetic properties of FINEMET amorphous ribbons has
been investigated using X-ray diffraction, Mössbauer spectroscopy, thermo-magnetic …

The effect of planar flow melt spinning (PFMS) parameters on the continuity, surface quality,
and structure of 10-mm-wide Fe 68.5 Si 18.5 B 9 Nb 3 Cu 1 ribbons has been investigated …

In this study, the planar flow casting (PFC) technique for producing wide amorphous ribbons
of Fe 71 Si 13.5 B 9 Nb 3 Cu 1 Al 1.5 Ge 1 alloy is investigated. Various ribbons of the …

The effect of quenching wheel speed on the structure and Curie temperature of Fe73. 5Si13.
5B9Nb3Cu1 alloy has been investigated using X-ray diffraction, differential scanning …

Abstract High-Fe Fe-metalloid alloys with the nominal composition of Fe 85 B 11–x C x P 4
(x= 0, 0.5, 1, 2, 3, 4) were fabricated through the melt-spun technique. Then, the effects of C …

The present investigation deals with the processing of rapidly solidified 10–40 mm wide, 30–
50 μm thick and 10–30 m long continuous amorphous ribbons of Fe–Si–B–Nb–Cu alloy …

Role of Si content on the structural, thermal and soft magnetic properties of melt spun and
annealed Fe 87− x Si x B 9 Nb 3 Cu 1 (x= 11, 13, 18, 20, 25 and 30 at.%) alloys has been …

Amorphous ribbons of different thicknesses of Co64. 5Fe3. 5Si16B14Ni2 alloy were
synthesized using the melt spinning technique by varying wheel speed. The effect of cooling …