Effect of Al2O3 nanoparticles on corrosion behavior of aluimnum alloy (Al-4.5 wt% Cu-1.5 wt% Mg) fabricated by powder metallurgy
MK Abbass, BF Sultan - Engineering Structures and …, 2019 - journals.vilniustech.lt
In this research the effect of Al 2 O 3 nanoparticles on corrosion behavior of aluminum base
alloy (Al-4.5 wt% Cu-1.5 wt% Mg) has been investigated. Nanocomopsites reinforced with …
alloy (Al-4.5 wt% Cu-1.5 wt% Mg) has been investigated. Nanocomopsites reinforced with …
Influence of Al2O3 and SiO2 nano-particles on hardness and corrosion resistance of aluminum alloy (Al-4.5% Cu-1.5% Mg)
MK Abbass, BF Sultan - Materials Research Express, 2019 - iopscience.iop.org
In the current work, the influence of a single and hybrid addition of the nano-particles (Al 2 O
3) and (SiO 2) on the corrosion resistance and polarization of the aluminum alloy (Al-4.5 …
3) and (SiO 2) on the corrosion resistance and polarization of the aluminum alloy (Al-4.5 …
[PDF][PDF] Mechanical Properties of Nano SiC Reinforced Aluminum 7075-T6 Produced by Warm Powder Compaction using an Inert Gas
GH Majzoobi, T Torkeman - Journal of Design Against Fatigue, 2023 - minerva-aset.com
The micron-sized Al7075 powder reinforced with nano-sized SiC particles is compacted at
4000C in an inert atmosphere using Nitrogen. It is shown that this technique can significantly …
4000C in an inert atmosphere using Nitrogen. It is shown that this technique can significantly …
[PDF][PDF] Journal of Design Against Fatigue
GH Majzoobi, T Torkeman - minerva-aset.com
The micron-sized Al7075 powder reinforced with nano-sized SiC particles is compacted at
4000C in an inert atmosphere using Nitrogen. It is shown that this technique can significantly …
4000C in an inert atmosphere using Nitrogen. It is shown that this technique can significantly …
[PDF][PDF] Study of the Effect of Al2o3&B4c Particles Reinforcement on Some Physical and Mechanical Properties for Aluminum Alloy 6063 by Powder Metallurgy …
SF Abduljabbar - 2019 - iasj.net
Powder metallurgy technique utilized in samples preparing. Samples were compacted by
using cold uniaxial pressing then followed by sintering process at 600 oC under inert gas …
using cold uniaxial pressing then followed by sintering process at 600 oC under inert gas …
Effects of reinforcement materials and matrix particle sizes on mechanical properties and wear of recycled aluminum chips
AS Mahdi - 2017 - eprints.uthm.edu.my
Recycling is the convert operation of the waste materials into objects and new materials. The
objective of this study is to recycle AA6061 aluminum from the chip. Three particle sizes …
objective of this study is to recycle AA6061 aluminum from the chip. Three particle sizes …