To address the current bottleneck of debris formation mechanism in plastic removal for hard-
brittle materials, a minimum chip thickness (h min) model that considers lubrication …

Application of electric current, while deforming the material is known to aid the deformation
process due to electroplastic effect. The experimentally observed behaviour during the …

The complexity of local and dynamic thermal transformations in additive manufacturing (AM)
processes makes it difficult to track in situ thermomechanical changes at different length …

Nickel-based superalloys are subjected to complex mechanical and thermal loads during
high-speed cutting, resulting in dynamic recrystallization behavior. The microstructure state …

The present research study was aimed at studying the impact of machining parameters on
grain size alterations in machining of Ti6Al4V alloy using finite element analysis (FEA) …

We present an experimentally validated computational model for microstructural evolution in
the cold spray additive manufacturing process of Al6061 alloy coating. The microstructural …

Surface integrity determines, among other factors such as tool material and wear, the
chemical composition and microstructure of the workpiece material as well as selected …

The metallurgical modification in non-ferrous metal alloys is carried out to adapt not only
physical or mechanical properties to their applications, but also to improve their …

This investigation explores the porosity, microstructure and mechanical properties of AZ31
Mg alloy fabricated by cold metal transfer-based wire arc additive manufacturing. The X-ray …

In this paper, the commercial FEM software package Abaqus is used to investigate the
evolution of dislocation density and grain size in orthogonal cutting of Al6061-T6 alloy using …