The graphite morphology transition was studied using various techniques and additives in
ultra-pure binary and ternary alloys with hypo-and hypereutectic compositions. Some of the …

The work described in this doctoral thesis has been carried out at the Department of
Materials Science and Engineering, The Royal Institute of Technology (KTH), between …

The corrosion behaviour of Al-alloyed ductile irons processed through rotary melting furnace
and sand casting was evaluated. This was to ascertain how viable is the applicability of the …

High Si and Al cast iron has been investigated experimentally and thermodynamically.
Alloys were prepared in the laboratory with low to high Al and Si concentrations …

Purpose–The aim of this paper is to study the tribological behaviour of Fe‐C‐Al cast iron at
different temperatures using universal pin‐on‐disk machine. Design/methodology/approach …

The effect of aluminium addition and austempering processes on the microstructures,
mechanical and wear properties of rotary melting furnace processed ductile irons was …

Having established that sulphur presence in the mould materials appears to have an
important contribution in graphite degeneration at least in the casting surface layer, a …

In this study, both quantitative and qualitative approach for estimating the aging behaviors of
gray cast iron (GCI) alloy at different times and temperatures was adopted. The data were …

Abstract High Si and Al cast iron has been investigated experimentally and
thermodynamically. Alloys were prepared in the laboratory with low to high Al and Si …

The microstructural characteristics and mechanical properties of rotary melting furnace
processed aluminium alloyed ductile irons were investigated in this study. This was aimed at …