Polymer composite films are superb dielectrics with high energy storage performance.
Accordingly, herein we fabricated thick dumbbell-shaped 0–3 composites by incorporating …

In this paper, nano-sized lead zirconate–titanate (PZT) powders were synthesized without
using any excess lead content by a hydrothermal method based on the reaction of TiO2, Pb …

Abstract Aurivillius phase Bi 4 Ti 3− x W x O 12+ 0.2 wt% NiO (BITNW-100x) ceramics were
prepared by a conventional sintering method. BINTW-based ceramics were sintered in a low …

The paper reports highest obtained dielectric constant for Ni-doped Lead Zirconate Titanate
[PZT, Pb (Zr 0.52 Ti 0.48) O 3] ceramics. The Ni-doped PZT ceramic pellets were prepared …

In the work, the multicomponent Pb 0.75 Ba 0.25 (Zr 0.65 Ti 0.35) 1-a Sn a O 3 (PBZT/Sn)
ceramics were obtained with various tin amounts (a from the range of 0.0 to 0.1). The …

This work shows the influence of admixture on the basic properties of the multicomponent
PbZr1− xTixO3 (PZT)-type ceramics. It presents the results of four compositions of PZT-type …

Lead zirconate titanate nanopowders Pb (Zr 0.52 Ti 0.48) O 3 (PZT) were prepared by
modified sol-gel process in ethylene glycol system with zirconium nitrate as the zirconium …

Polar ceramics with high homogeneity, high sinterability and nanocrystalline structure can
be obtained by hydrothermal procedures. The aim of this paper is to study the influence of …

This study demonstrates the impact of two sintering techniques on the fundamental
properties of doped PZT-type ceramic materials (with Mn4+, Sb3+, Gd3+, and W6+), with the …

In the present work, bilayered PZT-based ceramic materials were successfully produced via
dry pressing and sintering. The densification, compositional phase, and microstructure of the …