Metallurgical structure of A356 aluminum alloy solidified under mechanical vibration: An investigation of alternative semi-solid casting routes
C Limmaneevichitr, S Pongananpanya… - Materials & Design, 2009 - Elsevier
This study investigated the effects of mechanical vibration during solidification on the
metallurgical structure of hypoeutectic aluminum–silicon A356. A series of casting trials were …
metallurgical structure of hypoeutectic aluminum–silicon A356. A series of casting trials were …
Effects of pre-deformation and heat treatment conditions in the SIMA process on properties of an Al–Zn–Mg–Cu alloy modified by Al–8B grain refiner
This study was undertaken to investigate the influence of Al–8B master alloy on the
structural characteristics and hardness values of Al–12Zn–3Mg–2.5 Cu aluminum alloy. The …
structural characteristics and hardness values of Al–12Zn–3Mg–2.5 Cu aluminum alloy. The …
Investigation of the effect of Al–5Ti–1B grain refiner on dry sliding wear behavior of an Al–Zn–Mg–Cu alloy formed by strain-induced melt activation process
M Alipour, BG Aghdam, HE Rahnoma… - Materials & Design (1980 …, 2013 - Elsevier
This study was undertaken to investigate the influence of Al–5Ti–1B master alloy and
modified strain-induced melt activation process on the structural characteristics, mechanical …
modified strain-induced melt activation process on the structural characteristics, mechanical …
Effects of Al–5Ti–1B on the structure and hardness of a super high strength aluminum alloy produced by strain-induced melt activation process
In this study the effect of Al–5Ti–1B grain refiner on the structural characteristics and
hardness of Al–12Zn–3Mg–2.5 Cu aluminum alloy has been investigated. The alloy was …
hardness of Al–12Zn–3Mg–2.5 Cu aluminum alloy has been investigated. The alloy was …
Microstructural stability and rheological behavior of Al-Si-Cu alloys in the semi-solid state
This study investigates the microstructural stability and consequent rheological behavior of
Al-Si-Cu in the semi-solid state. It covers different stages in the production of the alloy …
Al-Si-Cu in the semi-solid state. It covers different stages in the production of the alloy …
Effect of the strain-induced melt activation (SIMA) process on the tensile properties of a new developed super high strength aluminum alloy modified by Al5Ti1B grain …
A Haghparast, M Nourimotlagh, M Alipour - Materials characterization, 2012 - Elsevier
In this study, the effect of Al5Ti1B grain refiners and modified strain-induced melt activation
process on an AlZnMgCu alloy was studied. The optimum level of Ti was found to be 0.1 …
process on an AlZnMgCu alloy was studied. The optimum level of Ti was found to be 0.1 …
ECAP: an alternative route for producing AlSiCu for use in SSM processing
CTW Proni, LV Torres, R Haghayeghi… - Materials Characterization, 2016 - Elsevier
In thixoforming processes control of the solid-to-liquid transition and grain size of the mush
metal is essential. If eutectic melting is avoided, subsequent melting of the primary phase …
metal is essential. If eutectic melting is avoided, subsequent melting of the primary phase …
Microstructural Evolution, Hardness, and Alligatoring in the Mushy State Rolled Cast Al-4.5Cu Alloy and In-Situ Al4.5Cu-5TiB2 Composite
MA Herbert, C Sarkar, R Mitra… - Metallurgical and Materials …, 2007 - Springer
A comparative study has been carried out on the microstructural evolution and hardness of
the Al-4.5 Cu alloy and in-situ Al-4.5 Cu-5TiB 2 composite, either water quenched from, or …
the Al-4.5 Cu alloy and in-situ Al-4.5 Cu-5TiB 2 composite, either water quenched from, or …
Microstructural characterization of primary and recycled aluminum AlSi7Mg alloy processed by the semi-solid thixocasting method
R Arcaleni, A Mantelli, L Girelli, L Tonelli, A Morri… - Materials …, 2024 - Elsevier
In recent years, the increasing need to use recycled aluminum alloys has driven the
exploration of advanced processes. Among these, thixocasting is attractive due to its …
exploration of advanced processes. Among these, thixocasting is attractive due to its …
Favorable environment for a nondendritic morphology in controlled diffusion solidification
AA Khalaf, S Shankar - Metallurgical and Materials Transactions A, 2011 - Springer
The novelty of the controlled diffusion solidification (CDS) process is the mixing of two
precursor alloys with different thermal masses to obtain the resultant desired alloy, which is …
precursor alloys with different thermal masses to obtain the resultant desired alloy, which is …