Glow discharge polymer (GDP) ablators with complex microstructures are critical in confined
inertial fusion applications. Micro-milling with controllable chip formation is of great interest …

The demand for complex micro-feature-based miniaturised products has grown over the last
few decades due to their higher utility in many fields such as micro-fluidic devices …

To achieve higher accuracy in the prediction of cutting forces in finish milling process of
sculptured parts, the curvatures of in-process workpiece surface are necessary to be taken …

Milling is a machining process in which material removal occurs due to the rotary motion of a
cutting tool relative to a typically stationary workpiece. In modern machining centers, up to …

By studying the edge-workpiece engagement (EWE), and taking two inclination (lead and
tilt) angles into account, the time-varying cutting areas and boundaries are determined, the …

Knowing that the chip geometry helps predict machining forces, energy and consequently
the machined surface quality, in the past, various models for the prediction of the …

Machining technology for nickel-based alloy Inconel 718 is a hotspot and difficult problem in
industrial fields and the high-speed milling (HSM) shows obvious superiority in difficult-to …

The working surface condition of abrasive tool is one of the important issues in grinding
process. This article discusses the effects of the ultrasonic vibration on the working surface …

切削加工有限元仿真是采用数值方法模拟切削加工过程的技术, 可以研究切削加工过程中材料
去除引发的各种物理机制, 在优化切削参数, 提高加工质量, 降低研究成本等方面具有显著优势 …

This paper presents a five-axis ball-end milling force model that is specifically tailored to
microscale machining. A composite cutting force is generated by combining two force …