Environmental degradation of structural materials in liquid lead-and lead-bismuth eutectic-cooled reactors
Liquid lead (Pb)-and lead–bismuth eutectic (LBE)-cooled fast neutron reactors (Gen-IV
LFRs) are one of the most technologically mature fission reactor technologies, due to their …
LFRs) are one of the most technologically mature fission reactor technologies, due to their …
Corrosion behavior and surface treatment of cladding materials used in high-temperature lead-bismuth eutectic alloy: A review
Liquid metal fast reactors were considered to be the most promising solution to meet the
enormous energy demand in the future. However, corrosion phenomenon caused by the …
enormous energy demand in the future. However, corrosion phenomenon caused by the …
A NEW PCR ASSAY FOR SIMULTANEOUS STUDIES OF LEUCOCYTOZOON, PLASMODIUM, AND HAEMOPROTEUS FROM AVIAN BLOOD
O Hellgren, J Waldenström… - Journal of …, 2004 - meridian.allenpress.com
Many bird species host several lineages of apicomplexan blood parasites (Protista spp.,
Haemosporida spp.), some of which are shared across different host species. To understand …
Haemosporida spp.), some of which are shared across different host species. To understand …
Generation-IV reactors and nuclear hydrogen production
There are dozens of hydrogen production methods and techniques from many sources such
as fossil fuels, renewable energy sources and nuclear energy in the literature. Thermo …
as fossil fuels, renewable energy sources and nuclear energy in the literature. Thermo …
Screening of the FeCrAl LBE corrosion-resistant coatings: The effect of Cr and Al contents
W Zhang, Y Zhong, X Qiu, Q Li, H Yue, Y Zhou… - Surface and Coatings …, 2023 - Elsevier
Sixteen kinds of FeCrAl coatings with different Cr and Al contents were prepared by the
magnetron sputtering method, and the thermal shock resistance and static lead‑bismuth …
magnetron sputtering method, and the thermal shock resistance and static lead‑bismuth …
Revealing fretting wear resistance mechanism under liquid lead-bismuth eutectic of Cr-Al-C composite coatings fabricated by laser cladding
Y Cao, K Hua, L Sun, H Ding, H Wu, H Wang - Tribology International, 2024 - Elsevier
Laser cladding technology was utilized to construct protective coatings on the surfaces of
service materials and to study the mechanical and fretting wear properties of the coatings …
service materials and to study the mechanical and fretting wear properties of the coatings …
Laser-clad FeCrAl/TiC composite coating on ferrite/martensitic steel: Significant grain refinement and wear resistance enhancement induced by adding TiC
By employing laser cladding, the surface of a ferritic/martensite (F/M) steel was coated with
FeCrAl metallic and FeCrAl/TiC composite coatings with their microstructures and wear …
FeCrAl metallic and FeCrAl/TiC composite coatings with their microstructures and wear …
Effect of LBE corrosion on microstructure of amorphous Al2O3 coating by magnetron sputtering
Y Zhong, W Zhang, Q Chen, J Yang, C Zhu, Q Li… - Surface and Coatings …, 2022 - Elsevier
The amorphous Al 2 O 3 coating with a thickness of approximately 3.3 μm was prepared on
ferritic/martensitic steel to investigate the corrosion resistance in contact with static liquid …
ferritic/martensitic steel to investigate the corrosion resistance in contact with static liquid …
Corrosion behavior of the FeCrAl coating with different Cr and Al contents before and after Au-ions irradiation in stagnant LBE
W Zhang, J Deng, H Yue, S Hu, X Qiu, H Yin, Q Li… - Corrosion …, 2023 - Elsevier
The corrosion behavior of the FeCrAl coating with different Cr and Al contents before and
after Au-ions irradiation was investigated in static LBE. The grain of the irradiated coating …
after Au-ions irradiation was investigated in static LBE. The grain of the irradiated coating …
Comparison investigation on corrosion of SIMP and T91 steels exposed to liquid LBE at 450℃: The role of Si on reducing oxidation rate
H Zhang, X Liu, Y Xu, L Zhao, T Peng, C Qin, R Yu… - Corrosion …, 2023 - Elsevier
A comparison investigation on the oxidation behavior of SIMP and T91 steels exposed to
oxygen saturated LBE up to 10000 h at 450℃ was conducted. The results show that the …
oxygen saturated LBE up to 10000 h at 450℃ was conducted. The results show that the …