We highlight the recent advance in strong transformation-induced plasticity (TRIP) steels,
which have higher alloying contents compared to the conventional TRIP steels for achieving …

Lightweight structural components made of advanced high‐strength steels (AHSSs) in the
automotive industry can substantially reduce greenhouse gas emissions. The 3rd …

In this paper, we demonstrate the design and manufacture of super-high strength medium
Mn steel with good ductility, via the combination of warm rolling and V alloying. This new …

In this paper, we present a novel two-step intercritical annealing process, ie a-few-minute
interruption during heating followed by a short intercritical annealing, to improve the …

The correlation between the strain-induced martensite transformation (SIMT) and the
Portevin-Le Chatelier (PLC) effect during tensile testing of a ferrite-austenite duplex medium …

A new medium-Mn steel was designed to achieve unprecedented tensile properties, with a
yield strength beyond 1.1 GPa and a uniform elongation over 50%. The tensile behavior …

In the present study, a hybrid in situ neutron diffraction and digital image correlation
measurement was performed on tensile deformation of an ultrafine grain (UFG) stainless …

In this study, a novel and efficient processing strategy involving a two-stage
thermomechanical process and flash annealing (FA) was applied to medium Mn steel …

Strain localization during tensile deformation of cold-rolled and annealed 7Mn steel were
investigated under various strain rates and deformation temperatures. The retained …

In general, the medium Mn steel with a dual phase microstructure of austenite and ferrite has
a yield point phenomenon. It is still not clear which phase firstly initiates the plasticity and …