Surface metal-matrix composites based on AZ91 magnesium alloy via friction stir processing: A review
H Mirzadeh - International Journal of Minerals, Metallurgy and …, 2023 - Springer
This monograph presents an overview of friction stir processing (FSP) of surface metal-
matrix composites (MMCs) using the AZ91 magnesium alloy. The reported results in relation …
matrix composites (MMCs) using the AZ91 magnesium alloy. The reported results in relation …
Application Status and Prospects of Friction Stir Processing in Wrought Magnesium Alloys: A Review
Z Zheng, Q Li, X Chen, A Gao, N Zhang - … of the Indian Institute of Metals, 2024 - Springer
As an industrially reliable, controllable and effective deformation technique, friction stir
process (FSP) can significantly refine the grain size, effectively activate prismatic plane and …
process (FSP) can significantly refine the grain size, effectively activate prismatic plane and …
[HTML][HTML] AZ91 镁合金搅拌摩擦表面金属基复合材料研究进展
H Mirzadeh - International Journal of Minerals, Metallurgy and …, 2023 - ijmmm.ustb.edu.cn
中文摘要本综述介绍了AZ91 镁合金的表面金属基复合材料(MMC) 的搅拌摩擦加工(FSP),
总结了有关各种增强颗粒的报道结果, 包括碳化硅(SiC), 氧化铝(Al 2 O 3), 石英(SiO 2) …
总结了有关各种增强颗粒的报道结果, 包括碳化硅(SiC), 氧化铝(Al 2 O 3), 石英(SiO 2) …
[HTML][HTML] Impact of in-process cooling and tool rotation speed on the mechanical and microstructural characteristics of friction stir processed AA2024
E Behtaripour, HR Jafarian, SH Seyedein… - Journal of Materials …, 2024 - Elsevier
Despite significant grain size refinement, friction stir processing (FSP) of heat-treatable
aluminum alloys is found to degrade the alloys of strength and hardness qualities. The drop …
aluminum alloys is found to degrade the alloys of strength and hardness qualities. The drop …
[HTML][HTML] Effect of underwater friction stir welding parameters on AA5754 alloy joints: experimental studies
The water as a welding environment may generate serious technological and metallurgical
problems but in certain cases, the physicochemical properties of water can be used …
problems but in certain cases, the physicochemical properties of water can be used …
[HTML][HTML] The Use of Ashes in Surface Metal Matrix Composites Produced by Friction Stir Processing
The article presents an assessment of the possibility of using ashes from the combustion of
coal and biomass as a reinforcing phase in metal matrix composites. The composite surface …
coal and biomass as a reinforcing phase in metal matrix composites. The composite surface …
[HTML][HTML] Effect of Shot Peening on the Low-Cycle Fatigue Behavior of an AA2519-T62 Friction-Stir-Welded Butt Joint
In this investigation, an AA2519-T62 FSW butt joint was subjected to shot peening with an
air pressure of p= 0.6 MPa, a processing time of t= 10 min (per side), and a steel ball …
air pressure of p= 0.6 MPa, a processing time of t= 10 min (per side), and a steel ball …
Influence of heat assisted friction stir processing on the mechanical properties and cell viability in PLA/basalt/graphene nanocomposites
A Nallathambi, P Muniyandi - Iranian Polymer Journal, 2024 - Springer
Polylactic acid (PLA) composites have been widely used in biomedical implants because of
biocompatibility and improved mechanical properties. The aim of this study is to produce the …
biocompatibility and improved mechanical properties. The aim of this study is to produce the …
[PDF][PDF] 强制冷却对搅拌摩擦加工QP1180 钢组织与力学性能的影响
王佳， 乔柯， 王文， 张婷， 郝政扬， 王快社 - 塑性工程学报, 2023 - qikan.cmes.org
分别在空气和液态CO 2 强制冷却条件下对QP1180 钢进行了搅拌摩擦加工(FSP), 采用OM,
SEM, EBSD 和TEM 技术研究了加工区微观结构特征和力学性能. 结果表明 …
SEM, EBSD 和TEM 技术研究了加工区微观结构特征和力学性能. 结果表明 …
[PDF][PDF] Study on Underwater Friction Stir Welding of AA7075-T651
This study examines the application of additional water cooling on the mechanical
properties of AA7075-T651 alloy friction stir welded butt joints. Underwater joints were …
properties of AA7075-T651 alloy friction stir welded butt joints. Underwater joints were …