Low temperature solid oxide electrolytes (LT-SOE): A review
Low temperature solid oxide fuel cell (LT-SOFC) can be a source of power for vehicles,
online grid, and at the same time reduce system cost, offer high reliability, and fast start-up. A …
online grid, and at the same time reduce system cost, offer high reliability, and fast start-up. A …
[HTML][HTML] Condutores de íons oxigênio: uma breve revisão
ENS Muccillo - Cerâmica, 2008 - SciELO Brasil
São descritas e comparadas as principais características relacionadas com as propriedades
de transporte de alguns condutores de íons oxigênio. Os materiais abordados …
de transporte de alguns condutores de íons oxigênio. Os materiais abordados …
Pilhas a combustível de óxido sólido: materiais, componentes e configurações
In this paper the current status of fuel cells is described with particular emphasis on high (T>
800 ºC) and intermediate (T< 800 ºC) temperature solid oxide fuel cells. Also the importance …
800 ºC) and intermediate (T< 800 ºC) temperature solid oxide fuel cells. Also the importance …
An investigation of structural, thermal, and electrical conductivity properties for understanding transport mechanisms of CuWO 4 and α-CuMoO 4 compounds
Recently, inorganic oxide components with high ionic conductivity have been widely
explored due to their high stability, safety, and energy density properties. In this context, the …
explored due to their high stability, safety, and energy density properties. In this context, the …
Grain and crystallite size in polycrystalline pyrite thin films
JR Ares, A Pascual, IJ Ferrer, C Sánchez - Thin Solid Films, 2005 - Elsevier
Pyrite thin films have been obtained by sulphuration of Fe thin films. The influence of
temperature and time of sulphuration on crystallite size (determined from XRD patterns) and …
temperature and time of sulphuration on crystallite size (determined from XRD patterns) and …
Exploiting the Bi-doping effect on the properties of NaNbO3 perovskite-type materials
In this work, Bi 3+ doped NaNbO 3 materials have been prepared successfully by the
hydrothermal method at low temperature and pressure. The influence of Bi 3+ dopant on the …
hydrothermal method at low temperature and pressure. The influence of Bi 3+ dopant on the …
Processing issues related to the bi-dimensional ionic conductivity of BIMEVOX ceramics
Abstract Bismuth vanadate, Bi 4 V 2 O 11, and its doped variations, Bi 4 (Co 0.15 V 0.85) 2 O
11, Bi 4 (Cu 0.1 V 0.9) 2 O 11, and Bi 4 (Cu 0.05 Ti 0.05 V 0.90) 2 O 11 are investigated with …
11, Bi 4 (Cu 0.1 V 0.9) 2 O 11, and Bi 4 (Cu 0.05 Ti 0.05 V 0.90) 2 O 11 are investigated with …
Influence of microwave-assisted calcination on structural properties and oxide-ion performance of layered-perovskite γ-BIMNVOX solid electrolyte synthesized by …
A Al-Alas, S Beg, NAS Al-Areqi, S Hafeez - Journal of the European …, 2013 - Elsevier
Samples of stabilized γ-BIMNVOX. x (Bi2V1− xMnxO5. 5− x/2) oxide-ion conductor with a
layered-perovskite type of structure were successfully synthesized under mild conditions by …
layered-perovskite type of structure were successfully synthesized under mild conditions by …
Molten Salt Synthesis of Bi4(V0.85Co0.15)2O11−δ (BICOVOX) Ceramic Powders
B Roy, PA Fuierer - Journal of the American Ceramic Society, 2009 - Wiley Online Library
Cobalt (15 at.%)‐doped bismuth vanadate, Bi4 (V0. 85Co0. 15) 2O11− δ (BICOVOX) is
known to have high oxygen ion conduction. However, the conductivity is highly anisotropic …
known to have high oxygen ion conduction. However, the conductivity is highly anisotropic …
Synthesis of cobalt-doped bismuth vanadate by combustion-synthesis: Influence of fuel on phase content and morphology
B Roy, PA Fuierer - Journal of Materials Research, 2009 - cambridge.org
Cobalt (15 at.%) doped bismuth vanadate, Bi4 (V0. 85Co0. 15) 2O11-δ (BICOVOX0. 15), is
known to have high oxygen ion conduction in the medium temperature range (400–600° C) …
known to have high oxygen ion conduction in the medium temperature range (400–600° C) …