Styrene-acrylonitrile (SAN) is widely used in various applications due to its excellent
properties, including thermal stability, dimensional stability, and chemical resistance …

Polylactide (PLA) has inherent shortcomings which limit its widespread application:
brittleness, low elongation and low melt strength. In this paper, these problems were …

ABSTRACT A mixture design of experiment and subsequent regression analysis was used
to study the effects of two additives on blends of poly (lactic acid)(PLA) and acrylonitrile …

In this work, acrylonitrile–butadiene–styrene ABS terpolymer was mixed with acrylic fiber,
cotton fiber, and waste textile fiber (WTF)(50/50 wt% cotton/acrylic fiber) with 10 and 30 wt …

AES, a terpolymer of acrylonitrile-EPDM (ethylene/propylene/diene elastomer)-styrene, was
blended in poly (butylene terephthalate)(PBT). Uniaxial tensile tests were carried out at …

Blends of PBT/ABS and PBT/ABS compatibilized with styrene‐acrylonitrile‐glycidyl
methacrylate (SAG) copolymer were prepared by melt blending method. Grafting degree …

The effect of a commercial styrene/butadiene/styrene-based compatibilizer (Styroflex) on the
tensile and impact properties of ternary blends of poly (acrylonitrile-co-butadiene-co …

Foram estudadas blendas de nylon-6 com copolímero de acrilonitrila/EPDM/estireno (AES)
utilizando, como agentes compatibilizantes, uma série de copolímeros reativos de …

The importance of alloys and blends has increased gradually in the polymer industry so that
the plastics industry has moved toward complex systems. The main reasons for making …

Blends of poly (butylene terephthalate)(PBT) with 30 wt% acrylonitrile–ethylene–propylene–
diene–styrene (AES) were prepared with methyl methacrylate (MMA)/glycidyl methacrylate …