Processing thin but robust electrolytes for solid-state batteries

M Balaish, JC Gonzalez-Rosillo, KJ Kim, Y Zhu… - Nature Energy, 2021 - nature.com
The widespread adoption of high-energy-density solid-state batteries (SSBs) requires cost-
effective processing and the integration of solid electrolytes of about the same thickness as …

Beyond traditional coatings: a review on thermal-sprayed functional and smart coatings

D Tejero-Martin, M Rezvani Rad, A McDonald… - Journal of thermal spray …, 2019 - Springer
Thermal spraying has been present for over a century, being greatly refined and optimized
during this time. It has become nowadays a reliable and cost-efficient method to deposit …

Cold spraying–A materials perspective

H Assadi, H Kreye, F Gärtner, T Klassen - Acta Materialia, 2016 - Elsevier
Cold spraying is a solid-state powder deposition process with several unique characteristics,
allowing production of coatings or bulk components from a wide range of materials. The …

The 2016 thermal spray roadmap

A Vardelle, C Moreau, J Akedo, H Ashrafizadeh… - Journal of thermal spray …, 2016 - Springer
Considerable progress has been made over the last decades in thermal spray technologies,
practices and applications. However, like other technologies, they have to continuously …

[PDF][PDF] An overview of the aerosol deposition method: Process fundamentals and new trends in materials applications

D Hanft, J Exner, M Schubert, T Stöcker… - J. Ceram. Sci …, 2015 - researchgate.net
Ceramic materials typically have to be sintered at high temperatures, often above 1000 C.
This precludes the coating of lower-melting substrate materials, such as metals, glasses and …

On parameter selection in cold spraying

H Assadi, T Schmidt, H Richter, JO Kliemann… - Journal of thermal spray …, 2011 - Springer
For cold spraying, a method for the construction of the window of deposition and the
selection of optimum process parameters is presented. Initially, particle impact velocity and …

Perovskite‐induced ultrasensitive and highly stable humidity sensor systems prepared by aerosol deposition at room temperature

MY Cho, S Kim, IS Kim, ES Kim… - Advanced Functional …, 2020 - Wiley Online Library
A new capacitive‐type humidity sensor is proposed using novel materials and fabrication
process for practical applications in sensitive environments and cost‐effective functional …

Cold spray: over 30 years of development toward a hot future

D Guo, M Kazasidis, A Hawkins, N Fan… - Journal of thermal spray …, 2022 - Springer
Cold Spray (CS) is a deposition process, part of the thermal spray family. In this method,
powder particles are accelerated at supersonic speed within a nozzle; impacts against a …

Review of electrochemical properties of hybrid coating systems on Mg with plasma electrolytic oxidation process as pretreatment

M Toorani, M Aliofkhazraei - Surfaces and Interfaces, 2019 - Elsevier
Fabricating adhesive coatings such as organic coatings with adequate corrosion protection
has been a concern due to the presence of oxide-hydroxide-carbonate deposits on the Mg …

High velocity impact induced microstructure evolution during deposition of cold spray coatings: A review

XT Luo, CX Li, FL Shang, GJ Yang, YY Wang… - Surface and Coatings …, 2014 - Elsevier
Cold spray is a fast growing coating process involving in high strain rate deformation of
spray particles. Early investigations stressed the retaining of feedstock microstructures into …