Objective: The aim of the present work was to compare the marginal precision of titanium
frameworks for a complete arch‐fixed prosthesis fabricated using five different methods …

Using first-principles calculations, the crystal structure, mechanical property and electronic
structure were investigated systematically for TM-Si (TM= V, Nb and Ta) systems. Pm 3¯ nV …

OBJECTIVES: To evaluate the surface and elemental alterations induced by electro
discharge machining (EDM) on the surface of dental cast alloys used for the fabrication of …

OBJECTIVE: The aim of the present study was to evaluate the effect of Electro Discharge
Machining (EDM) on the corrosion resistance of two types of dental alloys used for …

Statement of problem. Porosity is a frequently observed casting defect in dental titanium
alloys. Purpose. This study evaluated the effect of pressure of helium, argon, krypton, and …

Hydrofluoric acid offers a fast etching rate for removing 200 μm-thick alpha-cases from the
surfaces of cast Ti-6Al-4V. The acid picks up hydrogen gas into substrate of the cast, which …

OBJECTIVES: To investigate the bond strength between cpTi and low fusing porcelains after
different treatments. METHODS: 72 patterns were covered with a ceramic coating and …

OBJECTIVE: The aim of this study was to evaluate the castability of CP titanium and Ti–6Al–
4V alloy castings into Rematitan Plus investment at three different mold temperatures …

In titanium casting, a reaction byproduct known as alpha-case is a hard and brittle phase
layer that exists on the surface of cast objects. This reaction layer may be detrimental to the …

Environmental concerns are increasing rapidly, and the public and industry are concerned
about natural resources. The products are produced to meet the customer's demand as to …