Fracture mechanics tests in adhesively bonded joints: a literature review

FJP Chaves, LFM Da Silva, M De Moura… - The Journal of …, 2014 - Taylor & Francis
Fracture mechanics characterization tests for adhesive joints are analyzed and reviewed in
order to understand their advantages and disadvantages. Data reduction techniques for …

Composite laminate delamination simulation and experiment: A review of recent development

A Tabiei, W Zhang - Applied Mechanics Reviews, 2018 - asmedigitalcollection.asme.org
Composite laminate has extensive usage in the aerospace and automotive industries. Thus
delamination, one of its most prevalent and challenging failure modes, has attracted …

Simulation of delamination growth in multidirectional laminates under mode I and mixed mode I/II loadings using cohesive elements

L Zhao, Y Gong, J Zhang, Y Chen, B Fei - Composite structures, 2014 - Elsevier
A numerical model for accurately predicting the delamination propagation in multidirectional
laminates under mode I and mixed-mode I/II loadings using the cohesive element is …

Mode II fracture testing of composites: a new look at an old problem

BRK Blackman, AJ Brunner, JG Williams - Engineering fracture mechanics, 2006 - Elsevier
A number of technical issues have slowed the progress towards an agreed mode II test
protocol for composite laminates and perhaps the most important of these has concerned …

[HTML][HTML] The effect of T-stress on mixed mode I/II fracture of composite materials: Reinforcement isotropic solid model in combination with maximum shear stress theory

M Fakoor, S Shahsavar - International Journal of Solids and Structures, 2021 - Elsevier
Due to the existence of cracks and defects in composite materials during the manufacturing
process, damage and crack growth in these materials must be anticipated before …

Hygrothermal durability of epoxy adhesives used in civil structural applications

F Ascione, L Granata, L Guadagno, C Naddeo - Composite Structures, 2021 - Elsevier
Adhesive durability and joint reliability, strictly related to the bonding agents, are key
parameters still under evaluation in civil as well as in other engineering fields. Moisture …

Prediction of failure behavior of adhesively bonded CFRP scarf joints using a cohesive zone model

L Sun, Y Tie, Y Hou, X Lu, C Li - Engineering Fracture Mechanics, 2020 - Elsevier
In this article, the tensile behavior of adhesively bonded scarf joints (SAJs) of CFRP
laminates with ductile adhesive is investigated by experiments and finite element (FE) …

Cohesive law estimation of adhesive joints in mode II condition

JCS Azevedo, R Campilho, FJG Da Silva… - Theoretical and Applied …, 2015 - Elsevier
The adhesive bonding technique enables both weight and complexity reduction in structures
that require some joining technique to be used on account of fabrication/component shape …

[HTML][HTML] Characterization and analysis of the interlaminar behavior of thermoplastic composites considering fiber bridging and R-curve effects

B Tijs, S Abdel-Monsef, J Renart, A Turon… - Composites Part A …, 2022 - Elsevier
Thermoplastic composites can enable the development of new manufacturing techniques to
make the aviation industry more sustainable while at the same time greatly benefit cost …

Appropriate shape of cohesive zone model for delamination propagation in ENF specimens with R-curve effects

M Heidari-Rarani, AR Ghasemi - Theoretical and Applied Fracture …, 2017 - Elsevier
Shape and parameters of a cohesive zone model (CZM) significantly affect the finite element
modeling of delamination propagation in composites. The influence of various forms of …