The microstructural evolution, precipitation behavior, and hardness variation of the Ti-V-Mo
complex microalloyed steel during isothermal holding following austenite deformation have …

An experimental investigation has been conducted with respect to the element segregation
and microstructure evolution of a Mn–Cr–Mo alloyed oil casing steel from different …

The effects of Cr and Ni content on the low-temperature toughness and supercritical CO 2
corrosion resistance of high-strength low-alloy steel (HSLAs) were investigated by optical …

This study aims to investigate the effects of continuous cooling after deformation at 900° C
and isothermal cooling after deformation at 830° C on the microstructure and mechanical …

Surface quality and tensile strength are required for the deep processing yield of high-
carbon steel wires, particularly those with a cumulative reduction rate above 60​%. A …

An experimental investigation has been conducted with respect to the decomposition of
austenite to various ferritic products from different initial phase states (molten-state of 1550° …

An experimental investigation was conducted to elucidate the impact of cooling rate on the
microstructure evolution of boron-containing steel 22MnB5 by in-situ observation using the …

Interstitial free (IF) steels are characterized by their interstitial free ferritic matrix due to
addition of micro-alloying elements that draw carbon and nitrogen out of matrix to form …

The cooling process of a hot rolled strip on the run-out table (ROT) mainly determines the
microstructure and mechanical properties of the final product; therefore, a method of …

Microstructural evolution features have been systematically investigated for the weld metal
of EH36 shipbuilding steel under an in situ confocal scanning laser microscope. The …