The study reports in-situ nanocrystallization of Pb stabilized t-ZrO 2 in an amorphous Si (Pb,
Zr) OC matrix (PZSiOC) derived from lead zirconate modified poly (hydridomethylsiloxane) …

Dielectric, conductivity and modulus properties of MOS capacitor with zinc oxide (ZnO)
interlayer produced via RF magnetron sputtering were investigated by using admittance …

Abstract Pure and Ni/Co co-doped BiFeO 3 samples were prepared through sol‒gel auto-
combustion technique. The synthesized samples were calcined at 500° C for 1 h before …

Co-doping in BiFeO 3 is supposed to be an effective approach to mediate its multiferroic
characteristics, which are indispensable for its practical applications. In this regard, four …

In this work, the structural and dielectric properties for Mg 0.5 Co 0.5 Fe 2 O 4 ferrite
(abbreviated as MCFO) prepared by sol–gel process were investigated. The XRD …

Abstract Perovskite Ba 1-x Gd x TiO 3 thin films at different Ba: Gd ratios (0= x≤ 0.3, with
0.05 step) and film thicknesses have been fabricated in MFM configuration using sol-gel …

This paper investigates the physical properties of Cu0. 6Mg0. 2Co0. 2FeCrO4 spinel ferrite
produced by the sol-gel method and calcined at 850° C. Our specimen possesses a cubic …

In the present work, spinel ferrite T 0.35 Zn 0.55 Cu 0.1 Fe 2 O 4 (T= Mn, Ni) nanoparticles
have been synthesized via the sol-gel method. We have used the X-ray diffraction (XRD) …

This paper explores the suitability of atomic layer deposited hafnium oxide (HfO 2) based
resistive oxide memories for their integration into advanced embedded non-volatile memory …

A simple flame synthesis method was used to fabricate the Y 2/3 Cu 2.90 Zn 0.10 Ti 4 O 12
(YCZTO) material. The X-ray diffraction analysis showed the single-phase formation of the …