Recent progress and new directions in density functional theory based design of hard coatings
D Music, RW Geyer, JM Schneider - Surface and Coatings Technology, 2016 - Elsevier
Hardness, one key property of hard coatings, is proportional to shear modulus, which can be
predicted using density functional theory (DFT). Besides considering hardness, a design …
predicted using density functional theory (DFT). Besides considering hardness, a design …
Exploring the potential of high power impulse magnetron sputtering for growth of diamond-like carbon films
K Sarakinos, A Braun, C Zilkens, S Mráz… - Surface and Coatings …, 2012 - Elsevier
Amorphous carbon films are deposited employing high power impulse magnetron sputtering
(HiPIMS) at pulsing frequencies of 250Hz and 1kHz. Films are also deposited by direct …
(HiPIMS) at pulsing frequencies of 250Hz and 1kHz. Films are also deposited by direct …
Study on surface termination of boron-doped diamond electrodes under anodic polarization in H2SO4 by means of dynamic impedance technique
Anodic oxidation is a popular way to modify termination bonds at boron doped diamond
electrodes altering their electrochemical and physicochemical properties. Our studies …
electrodes altering their electrochemical and physicochemical properties. Our studies …
Optical and electronic properties of amorphous carbon materials
S Logothetidis - Diamond and related materials, 2003 - Elsevier
The optical and electronic properties of amorphous carbon (aC) films are studied with
spectroscopic ellipsometry in the extended energy region from IR to vacuum ultraviolet …
spectroscopic ellipsometry in the extended energy region from IR to vacuum ultraviolet …
Effect of the bias voltage on the structural and tribo-mechanical properties of Ag-containing amorphous carbon films
W Tillmann, NFL Dias, D Stangier, A Nienhaus… - Diamond and Related …, 2020 - Elsevier
The modification of amorphous carbon films by a mixture of Ag atoms is a promising
approach to reduce the residual stresses in the coating and to improve its adhesion to the …
approach to reduce the residual stresses in the coating and to improve its adhesion to the …
Synthesis of highly tetrahedral amorphous carbon by mixed-mode HiPIMS sputtering
Tetrahedral amorphous carbon films with an sp 3 content of 80% have been produced by
high power impulse magnetron sputtering (HiPIMS) operating in a mixed sputtering/arc …
high power impulse magnetron sputtering (HiPIMS) operating in a mixed sputtering/arc …
Haemocompatibility studies on carbon-based thin films by ellipsometry
S Logothetidis, M Gioti, S Lousinian, S Fotiadou - Thin solid films, 2005 - Elsevier
Carbon-based thin films, such as amorphous carbon (aC) and amorphous hydrogenated
diamond-like carbon (aC: H or DLC) are considered as excellent candidates for use as …
diamond-like carbon (aC: H or DLC) are considered as excellent candidates for use as …
On the tribological performance of magnetron sputtered WSC coatings with conventional and graded composition
T Vuchkov, V Leviandhika, A Cavaleiro - Surface and Coatings Technology, 2022 - Elsevier
Tungsten‑sulfur‑carbon coatings are coatings that have excellent lubrication capability, with
an ability to adapt to different operating environments. Their performance as a function of the …
an ability to adapt to different operating environments. Their performance as a function of the …
Haemocompatibility of carbon based thin films
S Logothetidis - Diamond and Related Materials, 2007 - Elsevier
Haemocompatibility is one of the most important properties that determine the
biocompatibility of the artificial implants. The haemocompatibility testing is to look for …
biocompatibility of the artificial implants. The haemocompatibility testing is to look for …
Correlation of sp2 carbon bonds content in magnetron-sputtered amorphous carbon films to their electrochemical H2O2 production for water decontamination …
The radio frequency (RF)-magnetron sputtering technique was used to deposit amorphous
carbon (aC) films onto different substrates at different deposition substrate temperatures (T …
carbon (aC) films onto different substrates at different deposition substrate temperatures (T …