Aluminum alloys are key materials in additive manufacturing (AM) technologies thanks to
their low density that, coupled with the possibility to create complex geometries of these …

The reliability of interface bonding strength between internal thermal sprayed coating and
cylinder bore substrate causes special concern in the field of internal thermal spraying. In …

Nickel–titanium (NiTi) alloys have recently attracted considerable attention due to their
unique properties, ie, shape memory effect and superelasticity. In addition, these promising …

In this study, the effect of the compaction velocity as well as the size and volume fraction of
the reinforcing particles on the corrosion properties of Mg–B 4 C composites were …

Abstract The Al–20Si–5Fe–3Cu–1Mg alloy was fabricated using selective laser melting
(SLM). The microstructure and the phase constitution of the SLM as well as the heat treated …

The paper presents the results of tests of rapid solidification (RS) aluminum alloys with the
addition of silicon (5%, 11%, and 20%). Casting by melt-spinning on the surface of an …

Iron (Fe) is the most common and the most detrimental impurity element in Al alloys due to
the formation of Fe-containing intermetallic compounds (IMCs), which are harmful to …

In situ reaction was activated in the powder mixture of Al/5 wt.% Fe2O3 by using selective
laser melting (SLM) to directly fabricate aluminium metal matrix composite parts. The …

This work presents a novel in situ reaction approach to produce Al matrix composites from a
powder mixture of Al/5 wt% Fe2O3 by using selective laser melting (SLM). It is found that the …

It is well documented that ultrasonic melt treatment (USMT) can refine dendritic and eutectic
microstructures during solidification, but much less attention has been paid to the effect of …