Представлены результаты экспериментального исследования лазерного импульсного
модифицирования поверхности нержавеющей стали 12Х18Н10Т в слое легирующей …

Abstract Ti–6Al–4V alloy is lightweight, heat treatable and machinable with excellent
strength characteristics. These properties favor its extensive applications in the automobile …

Reported works on laser alloyed steels have been reviewed. The premature failure of
engineering steels when employed in harsh working conditions is due to low hardness, poor …

Multiple track laser alloying is characterised by additional heat treatment and differences in
the amount of powder deposited at the overlap regions. These result in different …

Ti-6Al-4 V alloy possesses excellent mechanical and chemical properties which make it a
favorite material for the automobile, aerospace and aeronautical industries, but the alloy has …

Martensitic stainless steels are used in the production of steam turbine blades but their
application is limited due to low hardness and poor corrosion resistance. Laser surface …

In this paper, the authors report the structure and mechanical properties of WC–Co coatings
produced on low carbon steel substrates by liquid state sintering in vacuum. Special …

Accepted: 29 October 2018 Laser surface microtexturing techniques can improve the friction
properties of materials by reducing the contact area and form heat affected zones (HAZ) by …

The results of an experimental study of laser pulsed modification of the surface of stainless
steel 12CR18NI10T in a layer of alloying compound made of graphite paste and …

Silicon carbide (SiC), has excellent mechanical properties such as high hardness and good
wear resistance, and would have been a suitable laser-coating material for titanium alloy to …