The rapid development of additive manufacturing has fueled a revolution in various research
fields and industrial applications. Among the myriad of advanced 3D printing techniques …

Stereolithography (SLA) is an additive manufacturing method with one of the highest
accuracies (down to 100 nm) of all solid freeform techniques and has been used in various …

Keratin, a valuable protein obtained from chicken feather waste from the food industry, was
used in this study in combination with a biobased formulation of epoxidized linseed oil (ELO) …

Photo-curing 3D printing technologies use a specific wavelength light source to trigger the
polymerization of photosensitive resins, with the advantages of rapid curing and excellent …

The paper presents the synthesis and thermal behavior of novel epoxy resins prepared from
epoxidized castor oil in the presence of or without trimethylolpropane triglycidyl ether (TMP) …

Poor layer interface adhesion leads to increasing anisotropic properties and weakening
tensile properties of 3D printed parts. In order to reduce anisotropic properties and enhance …

A novel dual cure photopolymerizable system was developed by combining two plant-
derived acrylic monomers, acrylated epoxidized soybean oil and vanillin dimethacrylate, as …

Dual-curing Epoxy thermosets has found widespread use in polymer materials in recent
years. Dual-curing system is one of the ways used to control the curing rate of epoxy resin to …

A bio-based polymeric matrix was developed by the copolymerization of a vegetable oil-
based epoxy, epoxidized linseed oil (ELO), with dodecenyl succinic anhydride (DDSA). To …

The additive manufacturing (AM) industry increasingly looks to differentiate itself by utilizing
materials and processes that are green, clean, and sustainable. Biopolymers, bio‐sourced …