A review of mechanical and tribological properties of Ni3Al-based coatings-synthesis and high-temperature behavior
Ni-based superalloys and thin films have drawn the attention of researchers because of their
extraordinary properties. In particular, Nickel Aluminides like Ni 3 Al thin films show excellent …
extraordinary properties. In particular, Nickel Aluminides like Ni 3 Al thin films show excellent …
Impact of sputtering gas on the microstructural, mechanical and wetting properties of vanadium nitride coatings
Vanadium nitride (VN) coatings were deposited via reactive DC magnetron sputtering
technique on a hot substrate (400 C) with varying partial pressure of N 2. The impact of …
technique on a hot substrate (400 C) with varying partial pressure of N 2. The impact of …
Investigation of mechanical and microstructural properties of sputter-deposited Zr-Ni3Al coatings
Zr-doped Ni 3 Al alloy coatings were deposited on a silicon substrate using DC magnetron
cosputtering at a substrate temperature of 400 C. The transformation of phase …
cosputtering at a substrate temperature of 400 C. The transformation of phase …
The effect of sputtering parameters and doping on the properties of CrN‐based coatings—A critical review
Chromium‐based coatings have been of interest to researchers for the last two decades
because of their extraordinary properties like high hardness, high wear, and corrosion …
because of their extraordinary properties like high hardness, high wear, and corrosion …
Synthesis and characterization of low-friction WVN alloy coatings using reactive magnetron sputtering technique for tribological applications
In recent years, self-lubricating hard coatings have garnered significant interest across
various industries such as cutting tools, molds, and manufacturing because of their ability to …
various industries such as cutting tools, molds, and manufacturing because of their ability to …
Microstructural and Mechanical Properties of Cr-Ni3Al Alloy Films Synthesized by Magnetron Sputtering
Abstract Cr-Ni3Al alloy films have been deposited on Si (100) substrate via DC magnetron
sputtering. The effect of Cr enrichment on microstructure and mechanical properties has …
sputtering. The effect of Cr enrichment on microstructure and mechanical properties has …
Microstructure, Mechanical and Electrochemical Behavior of Magnetron-Sputtered Carbothermic Reduced Iron-Boride Ceramic Coatings
In this study, magnetron sputtered carbothermic reduced iron boride (FeB) coatings were
developed on grey cast iron (GCI) substrates at different substrate temperatures. The impact …
developed on grey cast iron (GCI) substrates at different substrate temperatures. The impact …
Characterization of sputter-deposited hydrophobic chromium doped nickel alumnide coatings for mechanical and high-temperature oxidation-resistant applications
Abstract Ni3Al and Cr-Ni3Al films were deposited on Inconel-718 using the DC magnetron
sputtering at a substrate temperature of 400° C. The evolution of phase, microstructure …
sputtering at a substrate temperature of 400° C. The evolution of phase, microstructure …
Investigation of NiV-based multilayers for the high energy x-ray probe
NC Gellert, KK Madsen, S Massahi… - Optics for EUV, X …, 2023 - spiedigitallibrary.org
The High Energy X-ray Probe (HEX-P) is a NASA probe-class mission concept that will
combine high spatial resolution x-ray imaging (⪅ 10 arcsec FWHM) and broad spectral …
combine high spatial resolution x-ray imaging (⪅ 10 arcsec FWHM) and broad spectral …
Oxidation Behavior of Atmospheric Plasma Sprayed NiAl Coating at High Pressure Oxygen Atmosphere
L Zhang, XJ Liao, XT Luo, CJ Li - Materials Science Forum, 2023 - Trans Tech Publ
The high-temperature and high-pressure oxygen-rich combustion gases often cause the
high temperature gas conduit in rocket engine to suffer severe oxidation, resulting in a …
high temperature gas conduit in rocket engine to suffer severe oxidation, resulting in a …