The paper presents the effect of heat treatment on low cycle fatigue properties and the
course of fatigue cracking in AA2519/Ti6Al4V sandwich laminates. The laminate is made by …

Cr/CrN nano-multilayers were grown on H13 steel and silicon (100), having different periods
(Λ), at room temperature using the unbalanced magnetron sputtering technique by varying …

Multi-reflection grazing incidence geometry, referred to as MGIXD, characterized by a small
and constant incidence angle, was applied to measure low surface stresses in very thin …

Multilayer coatings have the advantage of controlling residual stress that is difficult to
achieve with monolayer and bi-layer coatings. In this context, finite element modelling was …

Hot working dies are influenced by three main factors causing their destruction: the cyclically
changeable mechanical loads, intensive thermal shocks, as well as intensive friction, and …

The paper presents preliminary results of high cycle fatigue properties, including fatigue
cracking of layered laminate AA2519/AA1050/Ti6Al4V. The test material was obtained by …

The aim of the research was to investigate the influence of nitriding of the substrate made of
42CrMo4 steel on thermal stability of the antiwear CrCN coating deposited on its surface …

Methodology of stress measurements with multireflection grazing incidence method
(MGIXD) was investigated and developed. The parallel beam geometry was applied. The …

The multi-reflection grazing incidence X-ray diffrection was used to determine residual stress
gradient in the mechanically polished Al-Mg alloy and CrN coating. Also, the root mean …

The Göbel mirror allows parallelization of the divergent X-ray beam leading to its higher
intensity. Perfectly collimated (parallel) beam radically decreases errors of determined peak …