A review on the production of metal matrix composites through stir casting–Furnace design, properties, challenges, and research opportunities
Stir casting is one of the most suitable processes for producing Metal Matrix Composites
(MMCs) because of its simplicity, proven process, lower cost of production and mass …
(MMCs) because of its simplicity, proven process, lower cost of production and mass …
A review of aluminum metal matrix composites: fabrication route, reinforcements, microstructural, mechanical, and corrosion properties
Aluminum matrix composites (AMCs) developed with micro/nano-reinforcements emerge as
an attractive candidate for innumerable applications, including automotive, aerospace …
an attractive candidate for innumerable applications, including automotive, aerospace …
Tensile behavior and failure mechanism of 3D woven fabric reinforced aluminum composites
Z Wang, W Zhao, F Wang, X Teng, C Cai, J Xiao… - International Journal of …, 2023 - Elsevier
This paper aims to study the mechanical behavior and the complicated failure mechanism of
a novel Al matrix composites reinforced with 3D orthogonal woven carbon fiber. The quasi …
a novel Al matrix composites reinforced with 3D orthogonal woven carbon fiber. The quasi …
An analysis of the factors affecting strengthening in carbon fiber reinforced magnesium composites
For a thorough understanding of strengthening of carbon fiber reinforced magnesium matrix
composites (C f/Mg composites), all the issues affecting strengthening, including interface …
composites (C f/Mg composites), all the issues affecting strengthening, including interface …
[HTML][HTML] Electroless nickel plating and spontaneous infiltration behavior of woven carbon fibers
J Zhang, S Liu, J Liu, Y Lu, Y Liu, T Li - Materials & Design, 2020 - Elsevier
The effects of electroless Ni plating on the interaction between molten aluminium and
carbon fibers was studied to investigate the fabrication of woven carbon fiber-reinforced Al …
carbon fibers was studied to investigate the fabrication of woven carbon fiber-reinforced Al …
Effect of fiber orientation on mechanical properties of 2D-Cf/Al composites by liquid–solid extrusion following Vacuum infiltration technique
LH Qi, YQ Ma, JM Zhou, XH Hou, HJ Li - Materials Science and …, 2015 - Elsevier
Through the method of fiber lamination, carbon fiber preforms with different orientation
angles of 30°, 45°, 60° and 90° were prepared, and 2D-C f/Al composites were fabricated by …
angles of 30°, 45°, 60° and 90° were prepared, and 2D-C f/Al composites were fabricated by …
Growth mechanism and thermal behavior of electroless Cu plating on short carbon fibers
Y Ma, L Guo, L Qi, J Sun, J Wang, Y Cao - Surface and Coatings …, 2021 - Elsevier
Short carbon fibers (C sf), when used at 550–650° C, often suffer from oxidization and mass
loss during the preparation of C sf reinforced magnesium matrix composites (C sf/Mg …
loss during the preparation of C sf reinforced magnesium matrix composites (C sf/Mg …
High compression performance of Cf/SiC-Al composites fabricated by CVI and vacuum pressure infiltration
J Liao, Z Chen, T Guan, Y Li, Q Xiao, L Xue - Materials Science and …, 2021 - Elsevier
The strengthening effect of aluminum (Al) alloy as the second phase matrix on C f/SiC-Al
composites was investigated, and microstructures and compression performance of the …
composites was investigated, and microstructures and compression performance of the …
Investigation on mechanical properties and failure mechanisms of basalt fiber reinforced aluminum matrix composites under different loading conditions
Y Zhiming, L Jinxu, F Xinya, L Shukui… - Journal of …, 2018 - journals.sagepub.com
Basalt fiber reinforced aluminum matrix composites with different fiber contents (ie 0 wt%, 10
wt%, 30 wt% and 50 wt%) were prepared by hot-press sintering. Microstructure analysis …
wt%, 30 wt% and 50 wt%) were prepared by hot-press sintering. Microstructure analysis …
Study on defects of 2D-Cf/Al composite prepared by liquid-solid extrusion following vacuum infiltration technique
YQ Ma, LH Qi, T Zhang, JM Zhou, GZ Yao - The International Journal of …, 2017 - Springer
Two-dimensional C f/Al composites were fabricated by liquid-solid extrusion following
vacuum infiltration technique (LSEVI), and defects were studied and analyzed through …
vacuum infiltration technique (LSEVI), and defects were studied and analyzed through …