A 0.5–7.5 GHz Ultra Low-Voltage Low-Power Mixer Using Bulk-Injection Method by 0.18-m CMOS Technology

KH Liang, HY Chang, YJ Chan - IEEE Microwave and Wireless …, 2007 - ieeexplore.ieee.org
A fully differential low-voltage low-power downconversion mixer using a TSMC 0.18-mum
CMOS logic process is presented in this letter. The mixer was designed with a four-terminal …

A 0.35-V 520- 2.4-GHz Current-Bleeding Mixer With Inductive-Gate and Forward-Body Bias, Achieving >13-dB Conversion Gain and >55-dB Port-to-Port Isolation

GH Tan, H Ramiah, PI Mak… - IEEE Transactions on …, 2016 - ieeexplore.ieee.org
An ultralow voltage micropower 2.4-GHz current-bleeding active mixer for energy-harvesting
Bluetooth low energy/ZigBee applications is reported. It features a double-balanced mixer …

A 500μW 2.4 GHz CMOS subthreshold mixer for ultra low power applications

H Lee, S Mohammadi - 2007 IEEE Radio Frequency Integrated …, 2007 - ieeexplore.ieee.org
This paper presents an integrated 2.4 GHz ultra low power CMOS frequency down-
converting active mixer based on a single balanced Gilbert-cell resistor-loaded topology …

A 1-V 5-GHz self-bias folded-switch mixer in 90-nm CMOS for WLAN receiver

HK Chiou, KC Lin, WH Chen… - IEEE Transactions on …, 2011 - ieeexplore.ieee.org
A 5 GHz double balanced mixer (DBM) is implemented in standard 90 nm CMOS low-power
technology. A novel low-voltage self-bias current reuse technique is proposed in the RF …

An Ultra-Low-Voltage and Low-Power 2 Subharmonic Downconverter Mixer

S He, CE Saavedra - IEEE Transactions on Microwave Theory …, 2012 - ieeexplore.ieee.org
An 8.6 GHz * 2 subharmonic mixer with complementary current-reuse to enable ultra-low-
voltage and low-power operation is presented. The RF transconductance stage of the mixer …

A 2.4 GHz double balanced downconversion mixer with improved conversion gain in 180-nm technology

S Kumar, S Saraiyan, SK Dubey, S Pal… - Microsystem Technologies, 2020 - Springer
Abstract In this paper a 2.4-GHz non-return to zero (abbreviated as NRZ) active
downconversion mixer for transceiver system is demonstrated. It features with the double …

0.5–6 GHz low-voltage low-power mixer using a modified cascode topology in 0.18 µm CMOS technology

KH Liang, HY Chang - IET microwaves, antennas & propagation, 2011 - IET
A broadband low-voltage low-power down-conversion mixer using a 0.18 µm standard
CMOS process is presented. The proposed mixer uses a modified cascode topology with a …

A 0.12- 2.4-GHz CMOS Inductorless High Isolation Subharmonic Mixer With Effective Current-Reuse Transconductance

WK Chong, H Ramiah, N Vitee - IEEE Transactions on …, 2015 - ieeexplore.ieee.org
In this work, the design of an inductorless, high-isolation, and high conversion gain fully
differential subharmonic down-conversion mixer for 2.4-GHz wireless application is …

A 1-V wideband low-power CMOS active differential power splitter for wireless communication

SY Lee, CC Lai - IEEE transactions on microwave theory and …, 2007 - ieeexplore.ieee.org
A 1-V wideband CMOS phase and power splitter (PPS) with an RLC network load and
frequency compensation capacitor is proposed. Adopting the RLC network load and the …

On the design of customizable low-voltage common-gate LNA-mixer pair using current and charge reusing techniques

H Nejati, T Ragheb, Y Massoud - Proceedings of the 18th ACM Great …, 2008 - dl.acm.org
Given the fast growth of battery-powered wireless communication devices, developing
customizable low-voltage low-noise amplifiers (LNAs) and mixers has become a crucial …