Abstract 3D printing, also known as additive manufacturing, is a manufacturing process in
which the materials are deposited layer by layer in an additive manner. With the …

In this review, silver nanowires (AgNWs) are introduced, as the primary material to replace
indium tin oxide for fabricating cost‐effective flexible organic solar cells (FOSCs), because of …

This article reports on the recent progress in the research and development of flexible and
printed organic thin-film transistor (OTFT) devices, including organic materials, fabrication …

Following the ever‐expanding technological demands, printed electronics has shown
palpable potential to create new and commercially viable technologies that will benefit from …

Owing to the increasing interest in the nonvolatile memory devices, resistive switching
based on hybrid nanocomposite of a 2D material, molybdenum disulphide (MoS2) and …

Recently, machine learning has gained considerable attention in noncontact direct ink
writing because of its novel process modeling and optimization techniques. Unlike …

Resistive switching effect has been explored in the hybrid nanocomposite of organic-
inorganic materials by fabricating all printed memristive device on a flexible PET substrate …

Requirements for the miniaturization of electronics are constantly increasing as more and
more functions are aimed to be integrated into a single device. At the same time, there are …

Mechanisms, materials, and processes of high-resolution printing techniques dedicated to
printed electronics are reviewed. Advanced printing methods, including reverse offset …

Printed electronics has advanced during the recent decades in applications such as organic
photovoltaic cells and biosensors. However, the main limiting factors preventing the more …