Nano-and microstructuring of solids by swift heavy ions
FF Komarov - Physics-Uspekhi, 2017 - iopscience.iop.org
We review the current stage of research of track formation processes and mechanisms in
materials irradiated by swift ions. We show that the nature and morphology of tracks depend …
materials irradiated by swift ions. We show that the nature and morphology of tracks depend …
Нано-и микроструктурирование твёрдых тел быстрыми тяжёлыми ионами
ФФ Комаров - Успехи физических наук, 2017 - ufn.ru
Приведён анализ современного состояния исследований процессов и механизмов
трекообразования при облучении материалов быстрыми ионами. Показано, что …
трекообразования при облучении материалов быстрыми ионами. Показано, что …
Si diffusion induced adhesion and corrosion resistance in annealed RF sputtered SiC films on graphite substrate
Silicon carbide (SiC) is one of the promising candidates for graphite protection in different
applications involving high temperatures and a highly corrosive environment. An ideal …
applications involving high temperatures and a highly corrosive environment. An ideal …
The effects of 167 MeV Xe26+ swift heavy ions irradiation on chemical vapour deposited silicon carbide
The microstructural changes caused by Xe 26+ swift heavy ions on polycrystalline SiC were
investigated. Chemically vapour deposited SiC samples were irradiated by 167 MeV Xe 26+ …
investigated. Chemically vapour deposited SiC samples were irradiated by 167 MeV Xe 26+ …
A novel dual-step nucleation pathway in crystalline solids under neutron irradiation
S Meher, IJ Van Rooyen, TM Lillo - Scientific Reports, 2018 - nature.com
Innovations in nanostructuring of inorganic crystalline solids are often limited by prerequisite
critical nucleation energy and solute supersaturation for formation of a phase. This research …
critical nucleation energy and solute supersaturation for formation of a phase. This research …
Surface and interface structural analysis of W deposited on 6H–SiC substrates annealed in argon
A study of a tungsten (W) thin film deposited on a single crystalline 6H–SiC substrate and
annealed in Ar at temperatures of 700° C, 800° C, 900° C and 1000° C for 1 hour was …
annealed in Ar at temperatures of 700° C, 800° C, 900° C and 1000° C for 1 hour was …
Irradiation effects of swift heavy ions on palladium films deposited on 6H-SiC substrate
The irradiation effect of swift heavy ions on palladium (Pd) films deposited on 6H-SiC was
investigated. The samples were irradiated by Xe 26+ ions with the energy of 167 MeV at …
investigated. The samples were irradiated by Xe 26+ ions with the energy of 167 MeV at …
Surface roughness effect on the electrical characteristics of Pd/SiC nanocontacts
We report on the effect of the surface roughness of Pd nanostructures on the electrical
characteristics (Schottky barrier height) of Pd nanostructures/SiC nano-contacts as probed …
characteristics (Schottky barrier height) of Pd nanostructures/SiC nano-contacts as probed …
The effects of the thickness of the sandwiched layer and of the annealing time on induced nanostructures during solid state dewetting of a metal-semiconductor …
A structure made of a very thin Pd metal layer at the surface, followed by a SiC layer of
varied thickness were deposited onto a c-Si substrate by e-beam evaporation at room …
varied thickness were deposited onto a c-Si substrate by e-beam evaporation at room …
Dewetted Pt nanostructures on silicon carbide surface
We exploit the thermal-induced dewetting process of a deposited Pt film to produce two-
dimensional arrays of Pt nanostructures on SiC surface. After depositing 7.5 nm-thick Pt film …
dimensional arrays of Pt nanostructures on SiC surface. After depositing 7.5 nm-thick Pt film …