One of the main catalysts for the rapid development of the industrial economy sector is
mechanical engineering [1]. And in this regard the automobile industry plays an important …

Based on the results achieved in systematic studies of structure formation and the formation
of multicomponent phases, a scandium-containing filler metal from system alloy Mg-Zr-Nd …

To optimize the composition of steel in the work aims to identify the minimum required
number of chemical elements and their content to avoid overheating and unnecessary …

The wear of steel components of dynamically loaded tribocouplings is considered. The
relation between the wear resistance of metal and the structural homogeneity of the surface …

The main aim of this work is to improve the structure and properties of the magnesium alloy
ML5 by modifying it with alkaline earth metals (ALM). The separate and joint influence of …

Rational method for micro alloying auto sheet rolled steel of low-pearlite, 10 HFTBch steel,
which contributed to more uniform indicators of the mechanical properties of welded joints …

The object of research reported in this paper is the stressed-strained state of reactors when
producing titanium sponge by the magnesium thermal method, taking into consideration the …

This paper reports a study into the role of individual (S, P, N, C, Si, Mn, Ni, Cr) and combined
(Q< sub> 1= S, Q< sub> 2= S+ P, Q< sub> 3= S+ P+ N, Q< sub> 4= S+ P+ N+ C, Q< sub> 5 …

The wear is considered and power-producing state of a surface stratum exemplar after
friction with a difficult dynamic loading. The estimation of work destruction and …

It was found that steel 10ХФТБч (Standard of Ukraine), used for wheel disks of vehicles has
ferritic structure with a small amount of pearlite and retains a sufficiently high plasticity at …