[HTML][HTML] Nucleation and growth of Ag3Sn in Sn-Ag and Sn-Ag-Cu solder alloys
Abstract Large Ag 3 Sn plates in solder joints can affect the reliability of electronics,
however, the factors affecting their nucleation and morphology are not well understood …
however, the factors affecting their nucleation and morphology are not well understood …
Microstructural characteristics of high-pressure die casting with high strength–ductility synergy properties: a review
Q Yang, X Wu, X Qiu - Materials, 2023 - mdpi.com
In response to the increased emphasis on reducing carbon emissions, the demand for
lightweight, high-performance structural materials is quickly increasing, and Mg alloys …
lightweight, high-performance structural materials is quickly increasing, and Mg alloys …
Recent understanding of the oxidation and burning of magnesium alloys
This paper reviews the following for magnesium (Mg) alloys:(a) fundamentals of oxidation
and burning;(b) influence of alloying on oxidation;(c) theoretical models for improved …
and burning;(b) influence of alloying on oxidation;(c) theoretical models for improved …
Influence of β-Mg17Al12 and Al-Mn intermetallic compounds on the corrosion behaviour of cast and solution treated Mg-Al-Zn-Mn alloys
This study aims to investigate the correlation between the microstructure and corrosion
behaviour of AZ series alloys, using analytical scanning electron microscopy, X-ray …
behaviour of AZ series alloys, using analytical scanning electron microscopy, X-ray …
Achieving equiaxed microstructure and isotropic mechanical properties of additively manufactured AZ31 magnesium alloy via ultrasonic frequency pulsed arc
Q Cao, B Qi, C Zeng, R Zhang, B He, Z Qi… - Journal of Alloys and …, 2022 - Elsevier
The high cooling rate and thermal gradient in the wire arc additive manufacturing (WAAM)
process often leads to a tendency towards columnar grains or columnar dendrites in …
process often leads to a tendency towards columnar grains or columnar dendrites in …
[HTML][HTML] Wire arc additive manufacturing of a novel ATZM31 Mg alloy: microstructure evolution and mechanical properties
YH Yang, ZP Guan, PK Ma, MW Ren, HL Jia… - Journal of Magnesium …, 2023 - Elsevier
The preparation of large-scale magnesium (Mg) alloy parts by wire arc additive
manufacturing (WAAM) has broad application prospects, including automotive and …
manufacturing (WAAM) has broad application prospects, including automotive and …
[HTML][HTML] Microstructure and mechanical properties of GTA-based wire arc additive manufactured AZ91D magnesium alloy
X Cai, F Chen, B Dong, S Lin, C Yang - Journal of Magnesium and Alloys, 2024 - Elsevier
Wire arc additive manufacturing offers advantages in producing large metal structures. The
current research on GTA-based wire arc additive manufacturing (GTA-WAAM) of magnesium …
current research on GTA-based wire arc additive manufacturing (GTA-WAAM) of magnesium …
Efficient improvement for dissociation behavior and thermal decomposition of manganese ore by microwave calcination
K Li, J Chen, J Peng, M Omran, G Chen - Journal of cleaner production, 2020 - Elsevier
Traditional smelting process of manganese ore was plagued with high consume of power
and coke, and spraying and slag turning accidents caused by violent decomposition of …
and coke, and spraying and slag turning accidents caused by violent decomposition of …
Mitigating segregation and synergistically improving corrosion resistance via Ca-Y microalloying in twin-roll cast Mg-Al-Mn dilute alloys
X Dong, D Wang, H Jia, K Zhang, Y Chen, Y Yang… - Corrosion …, 2024 - Elsevier
This study investigates Ca-Y microalloying to address macro-segregation and enhance
corrosion resistance in twin-roll cast Mg-Al-Mn alloys. Ca-Y microalloying alleviates macro …
corrosion resistance in twin-roll cast Mg-Al-Mn alloys. Ca-Y microalloying alleviates macro …
Evolution of microstructure, phases and mechanical properties in lean as-cast Mg–Al–Ca–Mn alloys under the influence of a wide range of Ca/Al ratio
In the present investigation, the microstructure and phase evolution, and their implications
on the mechanical properties for different Ca/Al ratios (within~ 0.06–2.21, wt.%) in lean as …
on the mechanical properties for different Ca/Al ratios (within~ 0.06–2.21, wt.%) in lean as …