Pure magnesium (Mg) develops a strong basal texture after conventional processing of hot
rolling or extrusion. Consequently, it exhibits anisotropic mechanical properties and is …

Developing ultra-high strength in rare-earth-free Mg alloys using conventional extrusion
process is a great challenge. What is even more difficult is to achieve such a goal at a lower …

The deformation mechanisms of an extruded Mg-5Y-0.08 Ca (wt.%) alloy were analyzed by
means of micropillar compression tests on single crystals along different orientations …

Due to the insufficient slip systems, Mg and its alloys exhibit poor ductility during plastic
deformation at room temperature. To solve this problem, alloying is considered as a most …

Under the industrial demand of energy saving, weight loss has become one of the current
concerns. By increasing the strength of Mg-Li alloy with high lithium content, the industrial …

The mechanism by which Li additions induce a more homogeneous deformation was
systematically investigated in this study by comparing the deformation behavior of pure Mg …

Abstract Reactions of {10 1¯ 2} twin boundaries (TBs) with dislocations in a Mg alloy
subjected to cyclic deformation were studied and modeled, based on atomic-resolution …

In this study, the Mg–2.0 Zn–0.8 Gd (wt%) alloy with rare earth (RE) texture was successfully
cold-rolled in a single-pass rolling with 35% reduction without edge cracks. The …

It has been a common method to improve the mechanical properties of metals by
manipulating their microstructures via static recrystallization, ie, through heat treatment …

Reducing the hot working temperature and high-temperature deformation resistance of
titanium alloy to improve hot rolling and hot extrusion workability of products with thin walls …