During elevated-temperature thermomechanical processing, the occurrence of
recrystallization during straining is known as dynamic recrystallization (DRX), which usually …

Friction stir welding (FSW) is gaining attention over fusion welding is due to exceptional
advantages. The advantages in FSW are superior joint properties, less preparation time …

Solid-state additive manufacturing is a promising technology for production of high-strength
aluminum alloy components. However, most solid-state AM technologies use thin foils or …

The ability of the impression tests to obtain localized creep data is exploited to study the
creep behavior of the friction stir welded (FSWelded) joints made on 15 mm thick plates of …

In this paper, the microstructure evolution and fracture behavior of 1060 Al/AZ31B Mg
dissimilar friction stir welded joints were investigated. Experimental results showed that …

In friction stir welding (FSW) the material is welded without melting the base material.
Aerospace, automobile, shipbuilding and electronics are some of the industrial sectors …

Abstract Friction Stir Welding (FSW) is a candidate to overcome problems traditionally
encountered when conventional fusion welding methods are applied to join low weldability …

Nowadays, it is usual define welding as “a materials joining process in which two (or more)
parts are coalesced at their contacting surfaces by the suitable application of heat and/or …

This study presents the first experimental demonstration of high-speed friction stir butt
welding of 25.4 mm thick AA7175-T79 aluminum alloy. The utilization of friction stir welding …

Friction stir additive manufacturing is a newly developed solid-state additive manufacturing
technology. The material in the stirring zone can be re-stirred and reheated, and mechanical …