Cerium in aluminum alloys
F Czerwinski - Journal of materials science, 2020 - Springer
Rare-earth metals create unique opportunities in improving properties of aluminum alloys.
For over a century, there have been attempts to explore cerium for aluminum alloying …
For over a century, there have been attempts to explore cerium for aluminum alloying …
Al-Cu-Ce (-Zr) alloys with an exceptional combination of additive processability and mechanical properties
Abstract High-temperature Al-9Cu-6Ce and Al-9Cu-6Ce-1Zr (wt%) alloys were designed for
fabrication with laser powder bed fusion additive manufacturing (AM). An ultra-fine eutectic …
fabrication with laser powder bed fusion additive manufacturing (AM). An ultra-fine eutectic …
Microstructure and properties of novel heat resistant Al–Ce–Cu alloy for additive manufacturing
DR Manca, AY Churyumov, AV Pozdniakov… - Metals and Materials …, 2019 - Springer
The microstructure and properties of the novel heat resistant Al–3Ce–7Cu alloy produced by
selective laser melting were investigated. Fine Al 11 Ce 3 and Al 6.5 CeCu 6.5 eutectic …
selective laser melting were investigated. Fine Al 11 Ce 3 and Al 6.5 CeCu 6.5 eutectic …
Use of calcium in alloys: From modifying to alloying
EA Naumova - Russian Journal of Non-Ferrous Metals, 2018 - Springer
Calcium is one of the most widespread and, consequently, low-cost metals on Earth. It has
been applied for a long time in modifying and alloying alloys of heavy metals, in particular …
been applied for a long time in modifying and alloying alloys of heavy metals, in particular …
Structure and properties of new heat-resistant cast alloys based on the Al–Cu–Y and Al–Cu–Er systems
SM Amer, RY Barkov, AS Prosviryakov… - Physics of Metals and …, 2021 - Springer
The microstructure and mechanical properties of new high-temperature casting aluminum
alloys Al–5.6 Cu–2.0 Y–1Mg–0.8 Mn–0.3 Zr–0.15 Ti–0.15 Fe–0.15 Si and Al–5.4 Cu–3.0 Er …
alloys Al–5.6 Cu–2.0 Y–1Mg–0.8 Mn–0.3 Zr–0.15 Ti–0.15 Fe–0.15 Si and Al–5.4 Cu–3.0 Er …
A novel approach for enhanced mechanical properties in solid-state additive manufacturing by additive friction stir deposition using thermally stable Al-Ce-Mg alloy
An innovative approach to build a high-performance, thermally stable Al-8Ce-10Mg (wt.%)
alloy via friction-stir based solid-state additive manufacturing, called additive friction stir …
alloy via friction-stir based solid-state additive manufacturing, called additive friction stir …
The phase composition and mechanical properties of the novel precipitation-strengthening Al-Cu-Er-Mn-Zr alloy
S Amer, O Yakovtseva, I Loginova, S Medvedeva… - Applied Sciences, 2020 - mdpi.com
The microstructure, phase composition, and mechanical properties during heat treatment
and rolling of the novel Al-5.0 Cu-3.2 Er-0.9 Mn-0.3 Zr alloy were evaluated. A new …
and rolling of the novel Al-5.0 Cu-3.2 Er-0.9 Mn-0.3 Zr alloy were evaluated. A new …
Microstructure and materials characterisation of the novel Al–Cu–Y alloy
AV Pozdniakov, RY Barkov - Materials Science and …, 2018 - journals.sagepub.com
The microstructure, hot cracking susceptibility, and mechanical properties of a novel Al–Cu–
Y alloy were investigated. The Al–4.7 Cu–1.6 Y alloy demonstrated very good casting …
Y alloy were investigated. The Al–4.7 Cu–1.6 Y alloy demonstrated very good casting …
Structure and properties of new wrought Al–Cu–Y-and Al–Cu–Er-based alloys
SM Amer, RY Barkov, AS Prosviryakov… - Physics of Metals and …, 2021 - Springer
The structure and properties of new wrought aluminum Al–4.5 Cu–1.6 Y–0.9 Mg–0.6 Mn–0.2
Zr–0.1 Ti–0.15 Fe–0.15 Si and Al–4.0 Cu–2.7 Er–0.8 Mg–0.8 Mn–0.2 Zr–0.1 Ti–0.15 Fe …
Zr–0.1 Ti–0.15 Fe–0.15 Si and Al–4.0 Cu–2.7 Er–0.8 Mg–0.8 Mn–0.2 Zr–0.1 Ti–0.15 Fe …
[图书][B] Encyclopedia of aluminum and its alloys, two-volume set (print)
GE Totten, M Tiryakioglu, O Kessler - 2018 - taylorfrancis.com
This encyclopedia, written by authoritative experts under the guidance of an international
panel of key researchers from academia, national laboratories, and industry, is a …
panel of key researchers from academia, national laboratories, and industry, is a …