Purpose: This paper reviews the factors affecting shrinkage of molded parts in injection
molding. Methods: A selective screening of the papers published in the last 10 years was …

Over the years, injection molding has been a premier manufacturing technique in the
production of intricate polymer components. Its molding efficiency rests on the shoulders of …

Predicting the influence of material composition on the printability of highly filled metal
powder-polymer systems present a significant challenge in metal fused filament fabrication …

Aluminum nitride (AlN) is a promising material for heat sinks and microelectronic
applications because of the advantages of high theoretical thermal conductivity, high …

AlN ceramics were successfully fabricated through a joint process of digital light processing
(DLP) 3D printing technology and heat treatment at 1780° C∼ 1845° C. DLP is an addictive …

Continuous progress in material extrusion additive manufacturing is motivated by the need
to produce functional parts at a low cost for medical, aerospace, and automotive …

Si/SiC composite ceramics was produced by reaction sintering method in process of molten
silicon infiltration into porous C/SiC preform fabricated by powder injection molding followed …

Metal fused filament fabrication (MF 3) combines fused filament fabrication and sintering
processes to fabricate complex metal components. In MF 3, powder-polymer mixtures are …

This paper describes the advanced technology of reaction-bonded silicon carbide (RB-SiC)
fabrication. The technology is focused on the production of space mirror blanks. Four types …

Nano/micro-bimodal powders take advantages of both nano-and micro-powders. However,
densification of the bimodal powder samples is hardly predictable with conventional …